Victron MPPT Control (Remote for Victron Solar Charge Controllers)

Description

Details
The MPPT Control lets you see the status and modify the setup of all BlueSolar MPPT solar charge controllers that use a VE.Direct communications port
(all except the large aluminum-cased units).
A cable is required - please choose one from the drop-down.
Features
• View live status information
• View historical information
• All-time values
• 30-day historical values
• MPPT setup
A few of the values that can be displayed are:
• Panel power
• Panel voltage
• Yield today
• Charger state
• Battery current
• Battery voltage
• Load output state & current (when function is supported by controller)
• Maximum panel voltage
• Maximum power per day
• Maximum battery current
• Maximum battery voltage
• Minimum battery voltage
• Time spent in bulk, absorption, and float per day
The control can also be used to set the following parameters:
• Battery type
• Maximum allowed current Bulk time limit
• Absorption time limit
• Absorption voltage
• Float voltage
• Temperature compensation
• Load output (when function is supported by controller)
• Load switch low & high (when function is supported by controller)
The MPPT Control is mounted in the familiar BMV-700 series housing, maintaining a consistent and professional look to your panels. It can be flush mounted in a 52mm (2") hole, or an optional mounting box is available.
The MPPT Control requires a VE.Direct Cable, which is available in various lengths from 1' (0.3m) to 33' (10m).
For more information, see the Victron
MPPT Control User's Manual
.