PowMr Solar Hybrid Inverter 3000W 24V Pure Sine Wave 60A MPPT Controller AC110V

Description

Home
Payment
Shipping
Return Policy
About Us
Contact Us
Feedback
PowMr Solar Hybrid Inverter 3000W 24V Pure Sine Wave 60A MPPT Controller AC110V
The PowMr 110V off-grid solar inverter is a new all-in-one hybrid MPPT inverter charger, which integrates solar energy storage &means charging energy storage and AC sine wave output.
It can be widely used in
DC to AC areas, such as solar AC power systems, vehicle systems, RV power supply, security monitoring systems, emergency lighting systems, field power systems, household power systems, etc.
Features:
【
PURE SINE WAVE INVERTER
】24V Solar inverter 110Vac Adopt full digital voltage and current double closed-loop control, advanced SPWM technology, and output of pure sine wave. It is a new all-in-one solar inverter charger, with a built-in 60A Mppt charge controller. Support Utility/Generator/Solar Charge.
【
TECHNICAL SPECIFICATIONS
】Inverter Pure sine wave 3000W 24V DC to 120V AC. Max PV Input: 1600W, 100V(VOC), 40A; and Max.PV output: 1400W, 60A; AC Rate Input/ Output Voltage: 120Vac±5%; Hybrid charging Max charger current (AC charger+PV charger): 100A
【
COMPATIBLE BATTERY TYPE
】Lithium battery activation by PV solar or mains, allowing access to lead-acid batteries and lithium batteries. fit for 24V Lead-Acid (seal, AGM, Gel, Flooded) and Lithium battery.
【
MULTIPLE CHARGING MODES
】off grid hybrid power inverter will have four battery charging modes that are optional, i.e. only solar, utility priority, solar priority and utility & solar hybrid charging; and three load output working modes are available, i.e. PV priority and utility priority and inverter mode, to meet different application requirements.
【
w/LCD & LED DISPLAY
】LCD display design and 3 LED indicators for a dynamic display of system data and operating status, Intelligent variable speed fan to efficiently dissipate heat and extend system life. Can be accessed to a variety of household and office loads, including refrigerators, lamps, televisions, fans, air conditioning and other AC loads
Advantages:
Full digital voltage and current double closed-loop control, advanced SPWM technology, the output of pure sine wave.
Lithium battery activation by PV solar or mains, allowing access to lead-acid batteries and lithium batteries.
Two output modes: mains bypass and inverter output; uninterrupted power supply. （Load Working Mode can set Solar or Utility to provide priority）
Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority, and Mains & Solar hybrid charging.
Advanced MPPT technology with an efficiency of 99.9%. Built-in 60A MPPT controller
Designed with an LCD screen and 3 LED indicators for a dynamic display of system data and operating status.
Power saving mode available to reduce no-load loss.
Intelligent variable-speed fan to efficiently dissipate heat and extend system life.
ON/OFF rocker switch for AC output control.
Complete protection, including short circuit protection, over-voltage, and under-voltage protection, overload protection, reverse protection, etc.
Parameters
Model
POW-LVM3K-24V
Utility/Grid
Rated input Voltage
110/120Vac
Input voltage range
(90Vac~140Vac) ±2%
Frequency
50Hz/ 60Hz (auto-detect)
Frequency range
47-0.3Hz x 55-0.3Hz (50Hz);
57-0.3Hz x 65-0.3Hz (60Hz);
Overload / Short circuit Protection
Breaker
Efficiency
>95%
Conversion time (Bypass and reverse)
10ms
Reverse Flow Protection
Yes
Max Bypass Current load
40A
Inverter
Waveform
Rated Output (VA)
3000
Rated Output (W)
3000
Power factor
1
Output AC Voltage
120Vac(100/105/110Vac Settable)
Unstable Input Error
±5%
Output Frequency (Hz)
50Hz ±0.3Hz 60Hz ± 0.3Hz
Efficiency
>90%
Overload protection
(102＜load＜110%)±10%: reporting error and turning off the output after 5min;
(110＜load＜125%)±10%： reporting error and turning off the output after 10sec;
(125＜load)±10%： reporting error and turning off the output after 5sec;
Output Short-circuit Protection
Breaker
Bypass Breaker Specifications
40A
Rated Battery Voltage
24V (Minimum starting voltage 22V)
Battery voltage range
20.0Vdc~33Vdc ± 0.6Vdc
Power Saving Mode Self-Consumption
Self-Consumption ≤50W
No Load Self Consumption
48W
Utility/Grid Charging
Battery type
Lead Acid or Lithium
Maximum Charging Current (AC)
40A
Unstable Condition Error
± 5Adc
Charging Voltage Range
20 –33Vdc
Short-circuit protection
Breakers and fuses
Circuit Breaker Specifications
40A
Overcharge Protection
Yes; Automatically alerts and then turns off charging after1 minute
Solar (PV) Charging
Recommended PV Max
100Vdc
PV Operating Voltage
30-100Vdc
MPPT Voltage Range
30-95Vdc
Battery Charging Range
20-33Vdc
Maximum Input Power
1400W
Maximum Input Current
60A
Maximum Output Power
1400W
PV Charging Current Range
0-60A
Short-circuit Protection
Blown fuse
Wiring Protection
Reverse Polarity
General
Certifications
FCC Part 15 Class B, RoHS
Operating Temperature
5°F ~ 131°F/ -15°C ~ 55°C
Storage Temperature
-13°F ~ 140°F / -25°C ~ 60°C
Humidity
5% to 95% (three-layer paint protection)
Noise
≤60dB
Cooling
Fans, Forced cooling with adjustable air speed
IP Grade
IP 20
Safety Class
I
Dimensions (L-W-D)
14.8*11*4.05 in / 378mm*280mm*103mm
Weight
14.96 lbs /6.8kg
Four Battery Charging Mode：
CSO: Solar energy will charge the battery as a priority. The utility will charge the battery only when solar energy is not available.
CUB: Utility will charge the battery as a priority. Solar energy will charge the battery only when utility power is not available.
SNU (Default): Solar energy and utility will charge the battery at the same time.
OSO: Solar energy will be the only charging source even if utility is available.
Three-Load Working Mode:
SOL: Solar energy provides power to the loads as a priority, then Battery, then Utility AC power.
UTI(Default): Utility will provide power to the loads as a priority, then Solar and Battery power.
SBU: Battery power load first, then Utility.
AC Output Wiring NOTE：
Only the Live and Neutral wires will be connected to the Output Terminal Block, the Ground will be connected to the terminal.
Make sure any circuit breakers are disconnected and ensure the unit is in the off position.
AC Output should NEVER be connected to public power/utility or a generator.
There are two terminal blocks with “IN” and “OUT” markings. Please do NOT misconnect input and output connectors.
Battery Wiring :
Rated Battery
Discharge Current
Maximum Battery Charging Current
Recommended Wiring
Recommended Circuit Breaker
Recommended Ring Terminal
140A
100A
2AWG
2 pole-160A
5/16”
AC Output / Input Wiring:
Maximum Inverter Bypass Current
Recommended Wiring
Recommended Circuit Breaker
40A
7AWG
2 pole, 63A
Wiring Specification:
Specification
Minimum Recommended Wiring AWG
Max Amps
Battery Wiring
2AWG
140A
PV Wiring*
7AWG
40A
AC Input Wiring
7AWG
40A
AC Output Wiring
7AWG
40A
Warning:
Never install the all-in-one solar charge inverter and lead-acid battery in the same confined space! Also do not install in a confined place where battery gas may collect.
Ensure that there is enough air flowing through the heat sink, and space of at least 200m to the left and right air outlets of the inverter shall be left to ensure natural convection heat dissipation.
This 3000W Solar Inverter is suitable for 24V Battery banks systems ONLY
For PV to charge 24V battery banks, you will need a minimum PV Voc voltage of 34V DC.
Setting item voltage value: [12]<[04]<[14]
The Bluetooth module has been discontinued, and the wifi module needs to be purchased separately!
off-grid solar inverter all-in-one does not support parallel operation, and does not support phase separation!
Package includes:
Solar inverter*1
English user manual*1
Warranty card*1
Screw nail*4
Payment
Delivery Details
Terms of sales
About US
Contact us
Payment
1. We can accept PayPal only.
2. Please pay for your order within 48 hours before order close.
Delivery Details
Our warehouses are located in
California
, we will ship goods out for you
within 24 hours
. We offers a variety of shipping methods such as USPS, UPS, FEDEX.
1.
Shipment Time:
Your order will be sent out WITHIN THE HANDLING TIME.HANDLING TIME are based on 1 business days (Monday to Friday) excluding Holidays and weekends. After sending out the item, we will send you a notification letter, with the shipment information of the tracking number.
2.
Shipment Type
: The order of multi items may be sent via MULTI PACKAGES.If your order is including MULTI ITEMS, we may send the item to you via MULTI PACKAGES. If something is missing in the first package you received, please don't open a case or return, please ask us first, we will check if your order is sent via multi packages.
3.
Delivery Time
: DIFFERENT LOCATION, DIFFERENT SHIPPING TIME.In normal condition, the shipping time is about 2-5 working days. Some of that may be 5-10 working days.If you want to check the delivery time of your order, please kindly ask us first.
Last but not Least, PLEASE DON'T OPEN THE CASE AND RETURN REQUEST/LEAVE NEGATIVE FEEDBACK FOR US BEFORE Before sending us a letter!!!Any issues, please kindly contact the customer service of our store FIRST.
Terms of sales
1. We provide 30 days money back on non-defective, undamaged, unused and resalable products. Product is not eligible for refund after the 30-day refund period has expired.
2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3. For all returned products, Please contact us for the returning address and Pls do not open return case.
4. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund.  In return, we will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.
About US
Powmr is an energetic and technological innovative company, dedicated in researching, manufacturing and marketing solar related proudcts, the factory islocated in Shenzhen China. We provide products including Solar Controllers, Micro Grid Tie Inverters, Solar Lamps, MC4 Connectors and other Solar Related Products. The company presses the ISO9000 quality management system control product quantity strictly, the export production all passes the relevant national company check (CE), get high evaluation of the customer.
Since 2009, our service has been expanded to all over world.
Our products are widely used in Spain,United Kingdom,France,India,Italy,Australia and many other countries and regions ,and have been extensively applied and highly appraised in a number of major projects."Quality first, customer orientation" is our purpose. Powmr will be committed to provide the best service to you!
Contact us
1. Please contact us via eBay massage if you have any questions. We will reply you within 24 hours.
2. Feedback is important to us, we will leave positive to our customers.
3. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.
4. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute.