PowMr 5500W Hybrid Inverter 48V DC to 220V AC Off-Grid Pure Sine Wave Inverter

Description

PowMr 5500W Hybrid Inverter 48V DC to 220V AC Off-Grid Pure Sine Wave Inverter
NOTE 1
: This is a wide voltage Hybrid inverter. Solar panel input voltage must be higher 150V so that can start up the inverter to work.
NOTE 2
: This Hybrid Inverter supports the WIFI function, but need to buy the WIFI module connect to APP so that can monitor it.
NOTE 3
: This model does not support parallel, if you need to parallel, please contact us, and we will advise the correct model for you.
Advantages:
【
PURE SINE WAVE INVERTER
】5.5KW Solar Hybrid Inverter Output Voltage Regulation: 230Vac±5%, Max Input Power: 5500W; Max PV Array Open Circuit Voltage: 500DC, PV Array MPPT Voltage Range: 120VDC~450VDC, Max AC Input Voltage: 300Vac, Input Current: 18A.
【
Multiple Battery Options
】5500W Solar Inverter 48V DC to 220/230V AC, Built in 80A MPPT Charge Controller. New Upgrade Pure sine wave inverter, for 48V Lead-Acid(Seal, AGM, Gel, Flooded)/Lithium battery and can running without battery.
【
w/LCD & LED DISPLAY
】Hybrid Inverter Configurable input voltage range for home appliances and personal computers via LCD setting. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
【
Complete Protections
】PowMr inverter has Overload/Over temperature/Short circuit protection. Smart battery charger design for optimized battery performance. 48VDC to 220VAC inverter Compatible to mains voltage or generator power, Automatic restart when AC power is restored.
【
Scope of Application
】This Off-Grid inverter can power all kinds of appliances in the home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioner. But not support parallel.
Features:
Pure sine wave inverter
support running without battery
Built-in MPPT solar controller
Configurable input voltage range for home appliances and personal computers via LCD setting
Configurable battery charging current based on applications via LCD setting
Configurable AC/Solar Charger priority via LCD setting
Compatible to mains voltage or generator power
Auto restart while AC is recovering
Overload/ Over temperature/ short circuit protection
Smart battery charger design for optimized battery performance
Cold start function
Specifications
Line Mode Specifications
Input Voltage Waveform Sinusoidal (utility or generator)
Nominal Input Voltage: 230Vac
Max AC Input Voltage: 300Vac
Nominal Input Frequency: 50Hz / 60Hz (Auto detection)
Output Short Circuit Protection
Line mode: Circuit Breaker
Battery mode: Electronic Circuits
Efficiency (Line Mode)
>95% ( Rated R load, battery full charged )
Inverter Mode Specifications
Rated Output Power 5.5KVA/5.5KW
Output Voltage Waveform Pure Sine Wave
Output Voltage Regulation 230Vac±5%
Output Frequency 60Hz or 50Hz
Peak Efficiency 94%
Overload Protection 5s@≥140% load; 10s@100%~140% load
Surge Capacity 2* rated power for 5 seconds
Nominal DC Input Voltage 48Vdc
Charge Mode Specifications
Utility Charging Mode AC Charging Current (Max) 80Amp (@ VI/P=230Vac)
Bulk Charging Voltage Flooded Battery 58.4Vdc AGM / Gel Battery 56.4Vdc
Floating Charging Voltage 54Vdc
Overcharge Protection 63Vdc
Charging Algorithm 3-Step
Solar Input Rated Power 5500W
Max. PV Array Open Circuit Voltage 500Vdc
PV Array MPPT Voltage Range 120Vdc~450Vdc Max. Input Current 18A
Utility/Generator/Solar Energy
5.5KW Pure sine wave Power inverter, 48V DC to 220V-230V AC, built-in 80A MPPT charge controller. This is a multi-function inverter/charger, combining functions of inverter, solar charger and battery charger, Applied to Utility/Generator/Solar Energy.
LCD Display:
Configurable input voltage range for home appliances and personal computers via LCD setting. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Scope of Application
This solar inverter can power all kinds of appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioner.Notice:This inverter can accept parallel functions.
Warm Tips:
AC input/output connection
Please follow the below steps to implement AC input/output connection:
Before making AC input/output connection, be sure to open DC protector or disconnector first.
Remove insulation sleeve 10mm for six conductors. And shorten phase L and neutral conductor N 3 mm.
Insert AC input wires according to polarities indicated on terminal block and tighten the terminal screws. Be sure to connect PE protective conductor first.
Then, insert AC output wires according to polarities indicated on terminal block and tighten terminal screws. Be sure to connect PE protective conductor first.
Make sure the wires are securely connected.
CAUTION: Important:
Be sure to connect AC wires with the correct polarity. If L and N wires are connected reversely, it may cause utility short-circuited when these inverters are worked in parallel operation.
Appliances such as air conditioners are required at least 2~3 minutes to restart because it’s required to have enough time to balance refrigerant gas inside of circuits.
This 5500W inverter is single phase inverter, supports 48V battery only, and does not support parallel
In the mains bypass mode, the device cannot be connected to two-phase 220V AC power, that is, L1-L2 cannot be connected to L-N.
In inverter mode, after the device is connected to two-phase 220V, please do not select the main priority as the output priority, so as to avoid potential safety hazards for the device.
Do not connect the AC output end of the device to an autotransformer, so as not to affect the normal service life of the device.
Warm tip: The correct configuration of the battery capacity of the system is determined according to the specific use requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or consult us.
Package contains
MPPT Solar Inverter x1
English Product Manual x1
Payment
Delivery Details
Terms of sales
About US
Contact us
Payment
1. We can accept PayPal only.
2. Please pay for your order within 48 hours before order close.
Delivery Details
Our warehouses are located in
California
, we will ship goods out for you
within 24 hours
. We offers a variety of shipping methods such as USPS, UPS, FEDEX.
1.
Shipment Time:
Your order will be sent out WITHIN THE HANDLING TIME.HANDLING TIME are based on 1 business days (Monday to Friday) excluding Holidays and weekends. After sending out the item, we will send you a notification letter, with the shipment information of the tracking number.
2.
Shipment Type
: The order of multi items may be sent via MULTI PACKAGES.If your order is including MULTI ITEMS, we may send the item to you via MULTI PACKAGES. If something is missing in the first package you received, please don't open a case or return, please ask us first, we will check if your order is sent via multi packages.
3.
Delivery Time
: DIFFERENT LOCATION, DIFFERENT SHIPPING TIME.In normal condition, the shipping time is about 2-5 working days. Some of that may be 5-10 working days.If you want to check the delivery time of your order, please kindly ask us first.
Last but not Least, PLEASE DON'T OPEN THE CASE AND RETURN REQUEST/LEAVE NEGATIVE FEEDBACK FOR US BEFORE Before sending us a letter!!!Any issues, please kindly contact the customer service of our store FIRST.
Terms of sales
1. We provide 30 days money back on non-defective, undamaged, unused and resalable products. Product is not eligible for refund after the 30-day refund period has expired.
2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3. For all returned products, Please contact us for the returning address and Pls do not open return case.
4. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund.  In return, we will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.
About US
Powmr is an energetic and technological innovative company, dedicated in researching, manufacturing and marketing solar related proudcts, the factory islocated in Shenzhen China. We provide products including Solar Controllers, Micro Grid Tie Inverters, Solar Lamps, MC4 Connectors and other Solar Related Products. The company presses the ISO9000 quality management system control product quantity strictly, the export production all passes the relevant national company check (CE), get high evaluation of the customer.
Since 2009, our service has been expanded to all over world.
Our products are widely used in Spain,United Kingdom,France,India,Italy,Australia and many other countries and regions ,and have been extensively applied and highly appraised in a number of major projects."Quality first, customer orientation" is our purpose. Powmr will be committed to provide the best service to you!
Contact us
1. Please contact us via eBay massage if you have any questions. We will reply you within 24 hours.
2. Feedback is important to us, we will leave positive to our customers.
3. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.
4. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute.