PowMr 1500W 12V Hybrid Inverter Pure Sine Wave 80A MPPT Charge Controller + WIFI

Description

Home
Payment
Shipping
Return Policy
About Us
Contact Us
Feedback
PowMr 1500W 12V Hybrid Inverter Pure Sine Wave 80A MPPT Charge Controller + WIFI
PowMr off-grid Pure sine wave solar inverter 12Vdc to 230Vac is a new all-in-one inverter built with an 80A MPPT controller, which integrates solar energy storage &means charging energy storage and AC sine wave output. It can be widely used in DC to AC areas, such as
solar AC power systems, vehicle systems, RV power supplies, security monitoring systems, emergency lighting systems, field power systems, household power systems, etc.
NOTE :
1. This is a wide-voltage Hybrid inverter, The voltage that starts to connect to the solar panel
must be above 130V
for the Hybrid inverter to work normally. This means you can connect solar panels in series, saving you the cost of buying wires
2. In inverter mode, after the device is connected to two-phase 220V, please do not select utility priority for the output priority, so as not to cause safety hazards to the device.
4. Please do not connect the AC output of the device to the autotransformer, so as not to affect the normal service life of the device.
Advantages:
【
Pure sine Wave Inverter
】1500W Solar Hybrid Inverter 12V DC to AC 220/230/240V (Single phase/A Hot Leg 230V, Can't Output 110V AC), built in 80amp Mppt charge controller, is a new all-in-one hybrid solar inverter charger, fit for 12V Lead-Acid (Seal, AGM, Gel, Flooded) and Lithium battery (Need to be set via the “User-Defined”).
【
TECHNICAL SPECIFICATIONS
】1.5KW 12V Power Inverter Max.PV Input Power: 2000W, Voltage range: 90-430Vdc, Max.PV Input VOC: 450V DC, Starting voltage >130V; Recommended PV cable size:16AWG, Max. charge current: 80A. Nominal Input Frequency: 50/60Hz; Output Power:1500W, Surge Capacity: 3000W
【
MULTIPLE CHARGING MODES
】Off Grid MPPT Inverter has Four charging modes that are optional, i.e. Only Solar, Mains Frist, Solar Frist and Mains & Solar hybrid charging; and two output modes are available, i.e. Solar Frist, Mains Frist and SBU Priority, uninterrupted power supply to meet different application requirements. And compatible to mains voltage or generator power, Auto restart while AC is recovering.
【
WIDE RANGE OF USES
】MPPT Solar Inverter Pure sine Wave 1500W for RV Camping Boat Home Emergency ect. Can be accessed by a variety of household and office loads, including ovens, rice cookers, lamps, televisions, fans and other AC loads.
【
w/LCD & LED DISPLAY
】LCD display design and 3 LED indicators for a dynamic display of system data and operating status, Configurable battery charging current, AC/Solar Charger priority, and Load Supply Priority via LCD setting. Support WIFI/ GPRS remote monitoring, users can monitor the status of the PV system from the mobile phone or from the website anytime anywhere. (Need to be purchased separately).
Feature:
Configurable input voltage range for home appliances and personal computers via LCD setting
Configurable battery charging current based on applications via LCD setting
Configurable AC/Solar Charger Priority via LCD setting
Compatible to mains voltage or generator power
Battery charging mode and load working mode can be set
Auto restart while AC is recovering
Overload/ Over temperature/ short circuit protection
Smart battery charger design for optimized battery performance
Cold start function
Fit for 12V Lead-Acid (Seal, AGM, Gel, Flooded) and Lithium battery (Need to be set via the “User-Defined”).
Specification:
INVERTER MODEL
1.5KW 12V
Rated Output Power
1.5KW
Input Voltage Waveform
Sinusoidal (utility or generator)
Nominal Input Voltage
230Vac
Output Voltage Waveform
Pure Sine Wave
Output Frequency
50Hz
Low Loss Voltage
170Vac±7V (UPS)； 90Vac±7V (Appliances)
Low Loss Return Voltage
180Vac±7V (UPS);
100Vac±7V (Appliances)
High Loss Voltage
280Vac±7V
High Loss Return Voltage
270Vac±7V
Max AC Input Voltage
300Vac
Nominal Input Frequency
50Hz/ 60Hz (Auto-detection)
Output Short Circuit Protection
Circuit Breaker
Efficiency (Line Mode)
>95% ( Rated R load, battery full charged )
Transfer Time
10ms typical (UPS);
20ms typical (Appliances)
Peak Efficiency
91%
Overload Protection
5s@ >150% Io ad; 10s@ 110% ~ 150% Io ad
Surge Capacity
2* rated power for 5 seconds
Nominal DC Input Voltage
12Vdc
Cold Start Voltage
11.5Vdc
High DC Recovery Voltage
14.0Vdc
High DC Cut-off Voltage
16.0Vdc
No Load Power Consumption
<25W
Utility Charging Mode
INVERTER MODEL
1.5KW 12V
Charging Algorithm
3-Step
AC Charging Current (Max)
60 Amp
Bulk Charging Voltage
Flooded Battery
14.6
AGM / Gel Battery
14.1
Floating Charging Voltage
13.5Vdc
MPPT Solar Charging Mode
INVERTER MODEL
1.5KW 12V
Max. PV Array Power
2000W
Nominal PV Voltage
240Vdc
PV Array MPPT Voltage Range
90~430Vdc
Max. PV Array Open Circuit Voltage
450Vdc
Max Charging Current (AC charger plus solar charger)
80Amp
INVERTER MODEL
1.5KW 12V
Safety Certification
CE
Operating Temperature Range
-10°C to 50°C
Storage temperature
-15°C~ 60° C
Humidity
5% to 95% Relative Humidity (Non-condensing)
Dimension (D*W* H), mm
348X270X95
Net Weight, kg
10.5
3 Load Working Mode:
SOL: Solar energy provides power to the loads as a priority, then Battery, then Utility AC power.
UTI(Default): Utility will provide power to the loads as a priority, then Solar and Battery power.
SBU: Battery power load first, then Utility.
4 Charing
Working
Mode:
Only Solar
: Solar energy will be the only charging source even if utility is available.
Utility Priority
： Utility will provide power to the loads as first priority.
Solar and battery energy will provide power to the loads only when utility power is not available.
Solar Priority
： Solar energy provides power to the loads as first priority.
If solar energy is not sufficient to power all connected loads, battery energy will supply power the loads at the same time.
Hybrid Charging
： Solar energy provides power to the loads as first priority.
If solar energy is not sufficient to power all connected loads, battery energy will supply power to the loads at the same time.
Package includes
Unit X 1
User manual X 1
Communication cable x 1
Payment
Delivery Details
Terms of sales
About US
Contact us
Payment
1. We can accept PayPal only.
2. Please pay for your order within 48 hours before order close.
Delivery Details
Our warehouses are located in
California
, we will ship goods out for you
within 24 hours
. We offers a variety of shipping methods such as USPS, UPS, FEDEX.
1.
Shipment Time:
Your order will be sent out WITHIN THE HANDLING TIME.HANDLING TIME are based on 1 business days (Monday to Friday) excluding Holidays and weekends. After sending out the item, we will send you a notification letter, with the shipment information of the tracking number.
2.
Shipment Type
: The order of multi items may be sent via MULTI PACKAGES.If your order is including MULTI ITEMS, we may send the item to you via MULTI PACKAGES. If something is missing in the first package you received, please don't open a case or return, please ask us first, we will check if your order is sent via multi packages.
3.
Delivery Time
: DIFFERENT LOCATION, DIFFERENT SHIPPING TIME.In normal condition, the shipping time is about 2-5 working days. Some of that may be 5-10 working days.If you want to check the delivery time of your order, please kindly ask us first.
Last but not Least, PLEASE DON'T OPEN THE CASE AND RETURN REQUEST/LEAVE NEGATIVE FEEDBACK FOR US BEFORE Before sending us a letter!!!Any issues, please kindly contact the customer service of our store FIRST.
Terms of sales
1. We provide 30 days money back on non-defective, undamaged, unused and resalable products. Product is not eligible for refund after the 30-day refund period has expired.
2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3. For all returned products, Please contact us for the returning address and Pls do not open return case.
4. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund.  In return, we will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.
About US
Powmr is an energetic and technological innovative company, dedicated in researching, manufacturing and marketing solar related proudcts, the factory islocated in Shenzhen China. We provide products including Solar Controllers, Micro Grid Tie Inverters, Solar Lamps, MC4 Connectors and other Solar Related Products. The company presses the ISO9000 quality management system control product quantity strictly, the export production all passes the relevant national company check (CE), get high evaluation of the customer.
Since 2009, our service has been expanded to all over world.
Our products are widely used in Spain,United Kingdom,France,India,Italy,Australia and many other countries and regions ,and have been extensively applied and highly appraised in a number of major projects."Quality first, customer orientation" is our purpose. Powmr will be committed to provide the best service to you!
Contact us
1. Please contact us via eBay massage if you have any questions. We will reply you within 24 hours.
2. Feedback is important to us, we will leave positive to our customers.
3. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.
4. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute.