PowMr 100A MPPT Solar Panel Regulator Charge Controller 12/24V Auto LCD Max 100V

Description

Home
Payment
Shipping
Return Policy
About Us
Contact Us
Feedback
Limited Time Deals
PowMr 100A MPPT Solar Panel Regulator Charge Controller 12/24V Auto LCD Max 100V
PowMr 100A 12V/24VDC Auto MPPT Solar Charge Controller LCD Display With 0 Layer Principle Operating Model
Description:
100A MPPT solar charge controller:12/24VDC automatically identifying system voltage.Support 3 charging(constant current, constant voltage, floating charge) lead-acid battery options: Sealed, Gel, Flooded,Parameter user can reset
MPPT controller MAX.PV input power:1300W(12V system),2600W(24v system),Battery capacity configuration ≥800AH,Maximum power current 100A,Maximum open circuit voltage (V) ≤96V
All the Various Real-time data show on one display ,Convenient user to check，the power supply uses ultra low power chip ,reducing static standby power consumption ,reduce energy loss,Automatic temperature compensation function
Dual USB 5V Output charge 2.4A for phone charging, with function button to "manually" open load or manually close the load. Long press and hold this button for 5 seconds to restore the factory settings
Full protection:Battery reverse discharge protection,Battery reverse polarity protection,Battery under voltage protection,Overload, short-circuit protection.Aluminum heat sink allows for efficient heat dissipation.
Features：
- Brand: PowMr
- Product Model: K100 Pro
- All the Various Real-time data shown on one display, Convenient user to check( 0 Layer Principle Operating Model )
- Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%.
- High-quality components, perfecting system performance, with a maximum conversion efficiency of 98%.
- Ultra-fast tracking speed and guaranteed tracking efficiency.
- 12/24VDC automatically identifies system voltage.
- LCD panel display design, dynamically displaying tool‟s operating data and working condition.
- Support 3 charging lead-acid battery options: Sealed, Gel, Flooded.
- Charge mode: three stages (constant current, constant voltage, floating charge), it prolongs the service life of the batteries.
- Battery temperature compensation function.
- Multiple load work modes
- Application Scenario: Household system, monitoring system, base station, street lighting system, small power stations, etc.
- This solar charge controller with three a time function.
Specification:
Model
K100
Maximum power current
100A
Load output power
40A
Installation Lin（mm2）
20
Installation Line(AWG)
4#
Weight
2300g
Peak power of solar cell panel(Max Wp)
≤1300
Battery capacity configuration
≥800AH
Dimensions
300*200*100(mm)
Original Value
Battery float voltage
13.8V(12V system) / 27.6V(24V system)
Battery (under voltage) protection
10.6V(12V system) / 21.2V(24V system)
Battery (under voltage) recovery voltage
12.6V(12V system) / 25.2V(24V system)
System load loss: ≤13mA
Loop Buck: ≤100mV
Operating Temperature:-10℃~60℃
Storage Temperature: -30℃~70℃
Humidity requirements:≤90％, No condensation
Temperature compensation: -4mV/Cell/℃
Maximum open circuit voltage of the solar panel
18V-48V(12V system)/36V-96V
(24V system)
Solar panels maximum open circuit voltage (V)
≤96V
Installation Instructions
Installing wires, first loosen the screw counterclockwise
Prepare complete installation tools, materials, and cable. Please match suitable cable.
ensure that the current density is <4A/mm
2
This will help reduce the line pressure drop. Check the installation site meets the relevant safety requirements, avoid damp, dusty, flammable, explosive, and corrosive gases
Install the controller fixed to the vertical plane, see Section V mounting aperture and hole spacing. In order to ensure good controller cooling conditions, the controller on the bottom of each reserved 10cm space
As shown on the right wiring sequence: load, battery, solar. The battery plate is connected to the controller to be taken to ensure that the load, battery. The polarity of the solar cell panel and controller.
Warning: to prevent accidents (high pressure or high temperature), nonprofessionals can not engage in loading and unloading operations.
Be very careful when installing the batteries, especially flooded lead-acid batteries. Please wear eye protection, and have fresh water available to wash and clean any contact with battery acid.
Keep the battery away from any metal objects, which may cause a short circuit of the battery.
The controller requires at least 150mm to 300mm of clearance above and below for proper air flow, ventilation heat dissipation fan is highly recommended if mounted in a sealed enclosure.
Content Included
1X 100A MPPT Solar Charge Controller
1X English User Manual
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1. We can accept PayPal only.
2. Please pay for your order within 48 hours before order close.
Delivery details
1. Items are generally shipped out within 24 hours after your payment has been cleared (Sat. & Sun. excluded.)
2. Orders from the United States will all be shipped out via USPS/UPS. The shipment usually takes 1-4 business days( Exclude public holiday), if you need the item urgently, please contact us for detail before purchase. Whole shipping time is estimated time, it may be different at actual. Hope get your understanding.
3. We ship to US ONLY.
4. All items will be shipped to what address you leave on eBay. Please check your address information before place the order. If you want to change it, please contact us within 2 hours after you pay.
5. We are not responsible for wrong or undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.
Terms of sales
1. We provide 30 days money back on non-defective, undamaged, unused and resalable products. Product is not eligible for refund after the 30-day refund period has expired.
2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3. For all returned products, Please contact us for the returning address and Pls do not open return case.
4. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund.  In return, we will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.
About us
Why PowMr?
- Fast Delivery
- Free Shipping
- 24 months warranty
一Avg. response time 1 Hrs(WorkingDay)
- PowMr Everywhere
1. “Highly Quality first, customer orientation”is our purpose.
2.  PowMr will be committed to provide the best service to you!
Contact us
1. Please contact us via eBay massage if you have any questions. We will reply you within 24 hours.
2. Feedback is important to us, we will leave positive to our customers.
3. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.
4. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute.
Contact us~24 hours reply