Power Queen 12V/24V 30A MPPT Solar Panel Regulator Charge Controller LCD Display

Description

【12/24V MPPT with 99% Tracking Efficiency】
Given Innovation MPPT technology's high tracking efficiency of up to 99% and peak conversion efficiency of 98%, the Power Queen MPPT charge controller can track arrays' maximum power point to get the most power to charge the battery and loads. It improves the energy utilization ratio by 15%-20% when compared to conventional PWM controllers.
【Intuitive LCD Display & Remote Monitoring】
Power Queen MPPT Controller includes the LCD screen and multiple LED indicators, and it’s designed to display system operation information, customizable parameters, and error codes. With a Bluetooth adaptor (Not included) with RJ12 port and an integrated RS232 communication protocol, it allows the user to remotely monitor the real-time status of the solar panel, battery, and loads.
【LiFePO4 Default Setting & Widely Use Range】
The Power Queen 12/24V 30 Amp MPPT Charge Controller was conceived in response to the widespread demand from lithium battery users for a dedicated LiFePO4 battery controller. It's intended for LiFePO4 batteries, with a 12V LiFePO4 default setting, but it's also adaptable to Gel, Sealed, Flooded, and Lead-Acid batteries by manually setting.
【Solid Case Design & Built-in Multiple Protections】
The utilization of a die-cast aluminum heat sink increases heat dissipation efficiency, which reduces power loss due to heat. And it can operate at full load in temperatures ranging from -31°F to 113°F. Over-voltage, over-power, short-circuit, reverse-connection, reverse-charging, and over-temperature protection are all built in, ensuring total protection from the solar panels to the load terminal.
【Complete Accessories Are Available in One Package】
Power Queen MPPT Charge Controller provides the most comprehensive installing accessories for setting up a solar charge system. It saves you time in searching for the right accessories, allows you completing the installation when you receive the package and getting ready for the solar power system.
【U.S. Based warehouses & 24hrs Timely Service】
Power Queen backs up its 12/24V 30A MPPT Charge Controller with a 3-year warranty. Customers in United Stated are expected to receive the battery within 2~7 working days due to our local warehouse in CA, TX and GA. We provide a strong controller package, quick delivery as well as 24 hours timely customer support.
Specification:
Model :   PQ2430
Rated Charging Curr
e
nt :   30A
System Voltage:    12V(Default) / 24V / Auto
Rated Load Current:    20A
Battery Voltage:    9V to 35V
Operating Temperature:    -31°F to 113°F / -35°C to 45°C
Max. Power Point Voltage Range :   Battery Voltage +2V to 75V
Conversion Efficiency:    ≥98%
Max. Solar Input Voltage :   100V(77°F / 25°C) / 90V(-13° F / -25°C)
MPPT Tracking Efficiency :   ＞99%
Max. Solar Panel System Input Power:    400W for 12V / 800W for 24V
Communication Method:    RS232
Temperature Compensation Factor:    -3mv/°F or °C / 2V (Default)
Weight:    4.41lb / 2kg
Temperature Sensor:     Yes (Only for Lead-Acid battery)
Dimensions    L6.81*W2.85*H9.37inch/L173*W72.5*H238mm
Package Included:
Power Queen 30A MPPT Charge Controller*1
Remote Temperature Sensor (for Lead-Acid battery)*1
Mounting Brackets*4
Mounting Screws*8
Copper Wire Connector*6
Heat Shrink Tubing for cable*6
Installation Guide*1
User Manual*1
QA
1.    Does the solar charge controller come with the Bluetooth adaptor?
The Bluetooth adaptor is not included on this product page; however, if you are interested in purchasing the Bluetooth adaptor along with the MPPT charge controller, you can visit another bundled product that includes both the charge controller and the Bluetooth adaptor.
2.    Can the MPPT controller charge cable be connected in parallel / series to meet high power charging requirements?
Yes, the Power Queen MPPT controller can be connected in parallel to increase charging current for a single unit battery or a battery bank. But it's not able to be connected in series.
3.    How can I know if the Power Queen MPPT charge controller is compatible with my battery?
The Power Queen 12V/24V 30A MPPT charge controller is 12V LiFePO4 battery default setting, and the charge parameter can also be manually adjusted for use with 12V/24V LiFePO4, Gel, Sealed, Flooded, and Lead-Acid batteries.
4.    Is there any suggestion on MPPT charge controller installation?
We strongly advise reading the manual before installing the Power Queen MPPT charge controller. We have created a detailed installation guide with instructions at each step; if you have any additional questions, please contact the Power Queen technical team.
On Dec 15, 2022 at 23:13:43 PST, seller added the following information: