MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 30-100A 12V/24V

Description

12/24V 30/100A MPPT/PWM Solar Charge Controller Panel Battery Regulator Dual USB
BUY WITH CONFIDENCE
↓ ↓ ↓
√ 100% New & Excellent Quality
√ Strictly QC, Each set was fully tested before shipping
√ Free 1-3 Days Shipping From NJ,USA.S
hip within 24 hours.
√ Offer delivery with Tracking Num
ber
√
Free Return, Seller Pay!!
√ Lifetime Warranty
MPPT 100A 12V/24V/36V/48V
Feature:
✔ LCD Liquid Crystal Display:
The solar charging controller adopts an LCD liquid crystal display with backlight display, which can be clearly and intuitively displayed in the dark, one-key operation of the panel keys can adjust various system control parameters, such as float charging voltage, boost charging voltage, light control and time delay, etc.
✔ Multiple Operating Modes:
This solar charge controller has seven operating modes, such as charging mode, light control mode, light and time delay control mode, universal control mode, manual control mode, timing control mode and testing mode, among them, test mode is only available to the factory test.
✔ Large-section Wiring Port:
use large-section, large-spacing wiring ports, can be installed 16mm wire, the wire spacing of 7mm increases the insulation performance and the reliability of installation, effectively reduces current and voltage drop while reducing losses.
✔ Dual USB Charging Ports:
The solar charge controller adopts a dual USB charging port design, which can charge two devices at the same time, and supports most of USB port devices, such as mobile phones, tablets, PSP game consoles, etc.
✔ Thickened Aluminum Alloy Heat Sink:
The MOS tube is used to lock the heat sink design, the heat dissipation is more uniform, and there is no fear of the temperature rise caused by the MOS tube, the powerful heat dissipation capacity can operate normally in the environment of 55 ℃, at the same time, it is equipped with functions to prevent overcharge, overvoltage, DC output low voltage, high voltage protection and reverse polarity protection, etc.
Specification:
Model: SY-12/24/36/48V100A
Colour: Black
Maximum charging current: 100A
Maximum input voltage of photovoltaic panels: 23V (12V), 45V (24V), 69V (36V), 90V (48V)
Maximum input power of photovoltaic panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V)
Output voltage: DC12V/24V/36V/48V; DC5V/1.5Ax2USB
Working temperature: -25℃~55℃
Cooling method: heat sink self-cooling
Charging method: Focused MPPT modulation charging
Working mode: seven
Protection function: prevent overcharge, overvoltage/DC output low voltage, high voltage protection, reverse polarity protection, etc.
Product size (L*W*H): 195*183*68mm/7.68*7.20*2.68inch
Package size (L*W*H): 205*205*70mm/8.07*8.07*2.76inch
Package includes:
1 x Solar Charge Controller
1 x Manual
1 x Packing Box
MPPT 30A/50A/70A
Feature:
-Automatic Identification System Voltage,12V/24V auto recognition.
-Completed technical data for setup and modify.
- The load control mode can be selected， the timer function canbe reset for street light at night.
-Discharge capacity control& Discharge Counter of Ampere Hour.
-Working Storage Function： record the total run time of system,Record timers of error during running time， record times of full charged battery.
-Solar Panels， Battery， Solar Charge Controller positive poles areall connected together， adopting negative MOSFET in series control circuit.
-LCD display &Double Button Operation :high-definition display device status.
-Dual USB 2.4A fast charging ports, pure copper wiring port with good conductivity.
-Six intelligent safety protection&stable output, rapid operation :Efficiency increased by 30% with high voltage protection, short circuit protection, reverse connection protection, temperature protection, overload protection, low voltage protection.
-Alloy heat dissipation backplane fast heat dissipation: prevent the device from running for a long time to cause the circuit to heat up.
-Widely used: RV solar panel power supply in the car, solar panel large-scale power generation system, solar panel environmental protection street light, yachts and ships.
Specification:
System Voltage：12V/24V
Max Input Voltage of solar panel:55V
Self-consumption≤10mA
LVD:11.0V ADJ 9V…12V,x2/24V
LVR:12.6V ADJ 11V…13.5V,x2/24V
Float Voltage:13.8V ADJ 13V…15V,x2/24V
Boost charging:14.4V, *2/24V Battery Voltage less than 12V start boost charging 2 hours
Battery Over Voltage:16.5V,×2/24V
Reverse Connection Protection:yes
Load Over Current Protection:Yes， each two minutes restart once
Temperature Compensation:-24 mV /℃ for 12V system， x2/24V
Working Temperature：-20℃…+55℃
Waterproof grade:IP32
USB:5V 2.1A
DC output:12V/24V
Current display:YES
Charging Mode:MPPT
Model：70A
Max charge current:70A
Max discharge current:70A
Size :70A (L*W*H)14*3.5*17cm/5.5*1.38*6.69inch
Model：50A
Max charge current:50A
Max discharge current:50A
Size :50A (L*W*H)19*5.5*20.5cm/7.48*2.17*8.07inch
Model：30A
Max charge current:50A
Max discharge current:50A
Size :30A (L*W*H)14*3.5*17cm/5.5*1.38*6.69inch
Package including:
1*Charge Controller
1*Manual
MPPT+PWM 10A/30A/50A/80A/100A
Features:
-Build- in industrial micro controller.
-Big LCD/LED display ,charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions.
-Fully 3-stage charge management ,PWM battery charging as well as MPPT solar charge controller.
-Build -in short-circuit protection ,open-circuit protection,reverse protection,over-load protection.
-Dual USB output,the maximum current of 2.5A,to support Apple’s mobile phone charging .
-Dual reverse current protection ,low heat production.
Specification:
Rated voltage:12V/24V
Charging Mode:PWM MPPT
Max PV VOTAGE:50V
Max PV input Power:360W(12V) 720(24V)
colour: orange
Material: Plastic
size: 133x70x35mm/5.24”*2.76”*1.38”
Display: LCD screen
Self-consumption: <10MA
Overcharge protection: 14.4V / 28.8V
Overcharge Float charge: 13.7V / 27.4V
Charge recovery voltage: 12.6V / 25.2V
Over discharge protection: 10.7V / 21.4V
Over discharge recovery: 12.6V / 25.2V
Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.)
Working temperature: -35 ℃ -60 ℃
12V fits 18V solar panel, 24V fits 36V solar panel
12.0 volt lead acid battery corresponding
The float voltage is set to: 13.6
The recovery discharge voltage is set to: 12.6
The discharge cut-off voltage is set to: 10.7
12.8 volt lithium iron phosphate battery corresponding
The float voltage is set to: 14.6
The recovery discharge voltage is set to: 13.6
The discharge cut-off voltage is set to: 11.0
11.1 volt lithium battery corresponding
The float voltage is set to: 12.6
The recovery discharge voltage is set to: 11.6
The discharge cut-off voltage is set to: 9.6
The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available).
PV system power Description:
10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 12V photovoltaic system: power is respectively 100-1000W
10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 24V photovoltaic system: power is respectively 200-2000W
Package included:
1 x Solar Controller
1 x manual
MPPT-30A/40A/60A/100A [Blue]
Features:
-Industrial-grade master chip, 16AD sampling accuracy.Real-time display temperature&charging current&discharge current&power generation .
-Automatic focusing MPPT tracking charging ,high charging efficiency ,non-stop detection during charging,bidirectional focusing tracking.
-Large screen LCD display ,adjustable charging and discharging efficiency
Parameters.
-A complete three-phase charge management,effectively protect the battery which makes it moredurable.
-Build-in overhearting,overcurrent,short circuit,open circuit protection,reverse connection .
-Bidirectional MOS tube anti-back flow circuit, high-power charging mode,ultra low heat.
-R5.0 solar charging DC plug ,R5.0DC lamp output DC plug,convenient connection.
Specification:
Rated voltage:12V/24V
Operating temperature:-10+60℃
Material: ROHS+ABS
Application:Home, Industrial, Commercial
Size:170*32*91mm/6.7”*1.26”*3.58”
Color: blue and black
Rated current:30A -
Max input power: 390W(12V)/780W(24V)
Rated current:40A - Max input power: 500W(12V)/1000W(24V)
Rated current:60A - Max input power: 650W(12V)/1300W(24V)
Rated current:100A - Max input power: 650W(12V)/1300W(24V)
Package included:
1 x solar charge controller
1 x User Manual
PWM 30A/60A[Blue]
Specifications
:
Load: Light Control
MPN: RBL
Charging Mode:PWM
Model:RBL-30A
System Voltage:12V 24V
Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery)
Max input power: 390W(12V system); 780W(24V system)
Model:RBL-60A
System Voltage:12V 24V
Max input power: 750W(12V system); 1500W(24V system)
Equalization:12.6V(sealed) 14.2V(Gel) 14.6V(flood)
Float charge:13.7V(defaul,adjustable)，12.0-15.0V
Discharge stop voltage:10.7V(defaul,adjustable)，9.0-11.5V
Discharge reconnect voltage:12.5V(defaul,adjustable)，11.0-13.0V
Self-consume:<10mA
Batteries:Only fit for OPEN, AGM, GEL
Operating Temperature:-35℃~60℃
USB output:5V/2A Max
Dimension:13.4*7*3.3cm
Package includes:
1 x Solar Charge Controller
1 x User Manual
PWM 10A/20A/30A[Orange]
Feature:
✔ Using industrial-grade main control chip, real-time display of working temperature, charging current and discharge current.
✔ Large-screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control, adjustable charge and discharge parameters, with power-off memory, etc.
✔ Dual USB output, the maximum current is up to 2.5A, supporting Apple mobile phone charging.
✔ Complete 3-stage charging management, it can effectively protect the battery and make the battery more durable.
✔ Built-in over-current, short-circuit protection, open-circuit protection, and reverse connection protection, all of which are self-recovery, without damaging the controller.
✔ Anti-backflow circuit, ultra-low heat generation, auto focus, high charging efficiency, non-stop detection.
Specification:
Model: K1688
Colour: Black
Material:ABS
System voltage: 12V/24V automatic adaptation
Rated charging current: 10A/20A/30A
Rated discharge current: 10A/20A/30A
Maximum PV voltage: 50V
Maximum PV input power: 130W (12V) 260W (24V)
Boost charging voltage: 14.4V
Float voltage: 13.7V (default, adjustable)
Discharge cut-off voltage: 10.7V (default, adjustable)
Discharge recovery voltage: 12.6V (default, adjustable)
Charging recovery voltage: 13V
Threshold of light-controlled light-on: photovoltaic panel 8V (light-controlled light-on has a delay)
Threshold of light-controlled light-off: photovoltaic panel 8V (light-controlled light-off has a delay)
USB output: 2-way USB output, 5V/2.5A (maximum)
Standby current: <10mA
Working temperature: -35～+60℃
Size: 125*112*34mm/4.92*4.41*1.34inch
Packing size: 13*10.5*3.8cm/5.12*4.13*1.50inch
Package include:
1x Solar Panel Charge Controller
1x User Manual
1x Packing Box
Payment
Shipping
Return Policy
About Us
Contact Us
Payment
*** We accept Paypal,Visa,Credit Card, e-Check . etc.
Shipping
Below is the approximate delivery time to different countries (Just estimated)
*** 1-3 business days to buyer in USA via Expedited shipping
***1-5 business days to buyer in USA via USPS Standard Shipping
***5-12 business days to buyer in CANADA
***8-15 business days to buyer in EUROPE Country (Depends on Custom)
Return Policy
*** Free Return, we accept 60 days Money Back or Exchange Guarantee for All Items.
About Us
Customer Comes First !!
Contact Us
For any question or problem, please contact us in the first monent, we will always be here to
help you solve the problem.(From Monday to Saturday, not for Holidays).