MPPT 60AMP Solar Charge Controller For 12V 24V DC Battery Regulator MAX 1500W U3

Description

40A 60A MPPT So
lar Charge Controller Battery Regulator Charger 12/24V PV 100V
MPPT P40A
12V system : Open circuit voltage≤48V（Voc)   Max .PV input Power:500W
24V system: Open circuit voltage≤96V（Voc)    Max .PV input Power:1000W
MPPT P60A
12V system : Open circuit voltage≤48V（Voc)   Max .PV input Power:750W
24V system: Open circuit voltage≤96V（Voc)    Max .PV input Power:1500W
Overview:
MPPT series solar charge controller is based on an advanced maximum power point tracking (MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 98%.
This series MPPT have such advantages:
All the Various Real-time data show on one display ,Convenient user to check
The Solar Panel input voltage up to 100V, suitable for various specifications of solar panel
The power supply uses ultra low power chip ,reducing static standby power consumption ,reduce energy loss
Dual USB 5V Output for phone charging
Support Remote Display
Feature:
Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%.
High quality components, perfecting system performance, with maximum conversion efficiency of 98%.
Ultra-fast tracking speed and guaranteed tracking efficiency.
Wide MPP operating voltage range.
12/24VDC automatically identifying system voltage.
LCD panel display design, dynamically displaying tool‟s operating data and working condition.
Support 3 charging lead-acid battery options: Sealed, Gel, Flooded.
Charge mode: three stages (constant current, constant voltage, floating charge), it prolongs service life of the batteries.
Battery temperature compensation function.
Multiple load work modes
This solar charge controller with three time function.
A: time (night working) B: period (pause) C: time slot (dawn working)
Package Including:
1PCS MPPT Solar Controllers
1PCS User Manual (English)
1PCS Temperature Sensor
Function:
"P" series of an intelligent, multi-purpose solar charge controller
LCD screen display
Battery reverse discharge protection
Simple (and more time control) operation
Battery reverse polarity protection
MPPT charging mode
Battery under voltage protection
Parameter user can reset
Overload, short-circuit protection
A key to open and close the load
Automatic temperature compensation function
A key to restore the factory settings
USB5V charge 2.4A
LCD Operating interface description :
Network Line Interface (RS485) Indicator: Green light represents the battery, green light flashes, indicating that the load is working properly; yellow light indicates solar energy; yellow light flashes, indicating solar energy charging;
Parameter Table:
Model
MPPT P40
MPPT P60
Maximum power current
40A
60A
Battery Votlage
12V 24V Auto
Battery float voltage
13.8V(12V system)/27.6V(24V system)
Battery (under voltage) protection
10.6V(12V system)/21.2V(24V system)
Battery (under voltage) recovery voltage
12.6V(12V system)/25.2V(24V system)
Solar Panel Maximum open circuit voltage(Voc)
≤48V（Voc）12V system ;  ≤96V（Voc）24V system
Maximum open circuit voltage of the solar panel (Voc)
18V-48V(12V system) / 36V-96V(24V system)
Maximum PV input power
520W(12V system)
1040W(24V system)
750W(12V system)
1500W(24V system)
System load loss
≤13mA
Loop Buck
≤100mV
Operating Temperature
-10°C~60°C
Storeage Temperature
-30°C~70°C
Humidity requirements
≤90%, No condensation
Temperature compensation
-4mV/Cell/°C
Installaton Lin(mm2)
8mm2
10mm2
Installaton Line(AWG)
10(AWG)
10(AWG)
Batery capacity configuration
≥300AH
≥400AH
Photo:
Product Description
40A  60A MPPT Solar Charger Controller for 12V/24V/36V/48VDC Batteries
100% MPPT controller
Intelligent Maximum Power Point Tracking technology
Built-in DSP controller with high performance
Automatic battery voltage detection 12V/24V
Three-stage charging optimises battery performance
Multi-function LCD displays
Reverse polarity protection of solar panel
Overcharge protection
Can be mounted easily
Suitable for battery types of sealed lead acid, vented Gel, and Lithium battery
Notes: The output terminal is for lamp only
( 12V system less 60W, 24V system less 100W ),
and it will be burnt if connecting to other loads.
The output for the battery is no polarity reverse protection.
Datasheet:
Model No
MPPT-30A
MPPT-40A
MPPT-50A
MPPT-60A
Charging mode
MPPT Maximum power point tracking automatically
Charging
3-stage
：
constant current(MPPT), constant voltage(Absorption Voltage), floating charge
System type
DC12V/24V/36V/48V Recognition automatically
System voltage automatic recognition
12V system (DC9V-DC15V)
24V system (DC18V-DC29V)
36V system (DC30V-DC39V)
48V system (DC40V~DC60V)
Soft start time
≤1S
≤1S
≤1S
≤1S
Dynamic response and recovery time
100us
100us
100us
100us
Max efficiency
≥98.1%
(Voc is 1.5 or 2 times than battery, then it’s best efficiency)
PV utilization
≥99%
≥99%
≥99%
≥99%
Input specification
Voc from PV
( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s best efficiency. )
12V system (DC20V~DC80V)
24V system (DC37V~DC100V)
The maximum PV input voltage (Voc)
DC190V
(The controller can’t work at this voltage of long duration that will break controller. Please refer to Input voltage from PV.)
The maximum PV input power
(The total power rated of PV can’t be over this watt that will break the controller.)
12V system (400W)
24V system (720W)
12V system (480W)
24V system (960W)
12V system (600W)
24V system (1200W)
12V system (720W)
24V system (1440W)
Output specification
Selectable battery type(default is Sealed)
Vented/ Sealed / Gel / NiCd / Lithium battery
(defined voltage for other battery by user)
Absorption Charging Voltage
Refer to Batteries charging reference
Floating Charging Voltage
Refer to Batteries charging reference
Overcharging protection voltage
12V system (15V)
24V system (30V)
36V system (45V)
48V system (60V)
Rated output current
30A
40A
50A
60A
Temperature Coefficient
±0.02%/ centi-degree
Automatic temperature compensation
14.2V-
（
Max temperature-25 centi-degree
）
*0.3
Output voltage ripple-peak
100mV
100mV
100mV
100mV
Output voltage accuracy
≤±1%
≤±1%
≤±1%
≤±1%
Indicating
LCD display
See LCD display instruction
See LCD display instruction
See LCD display instruction
See LCD display instruction
LED display
CPU working indicator
CPU working indicator
CPU working indicator
CPU working indicator
Protection function
Output over-voltage protection
See output specification
See output specification
See output specification
See output specification
Input Anti-intrusion protection
yes
yes
yes
yes
Temperature Protection
75 centi-degree
75 centi-degree
75 centi-degree
75 centi-degree
Temperature increased protection
Output power will reduce when it’s more 70 centi-degree.
Output power will be normal when it’s less 55 centi-degree.
Fan-on temperature
>40 centi-degree
>40 centi-degree
>40 centi-degree
>40 centi-degree
Fan-off temperature
<35 centi-degree
<35 centi-degree
<35 centi-degree
<35 centi-degree
Other parameters
Acoustic noise
≤40dB
≤40dB
≤40dB
≤40dB
Cooling way
Forced air cooling.
Components
Imported materials
，
Accord  to EU standards, Industrial grade range.
Environmental requirements
Meet 2002/95/EC; No cadmium, hydrides and fluorides
Properties
Size (mm)
210x210x85
210x210x85
210x210x85
210x210x85
Net weight(Kg)
1.25
1.25
1.35
1.35
Gross weight(Kg)
1.35
1.35
1.45
1.45
Security Level
According to CE
、
PSE
、
FCC
、
EMC,EN60950
Electromagnetic Compatibility
According to EN61000
，
EN55022
，
EN55024
Enclosure
IP21
IP21
IP21
IP21
On Dec 27, 2022 at 08:17:18 PST, seller added the following information: