MPP Solar LV6548 UL1741 Cert 6.5kW 120V output 2 x 4kW MPPT (80A x 2) at 250VDC

Description

Link to the manual  copy and paste into your browser:
https://watts247.com/manuals/mpp/LV6548.pdf"
Youtube vid of running truly batteryless: https://youtu.be/KEJKoYqbYQw
Education links to diagrams and calculations:
https://usamppsolar.com/education/
Please don't cry to us when you decided to buy from an international/fake/copy seller - no support, no local warranty, no local phone number. (It happens all the time)
There are lots of fake Chinese copies out there , perhaps saving you 100 to 200 bucks,  I say - go for it! Once bitten, twice shy.
T
he
LV6548
is the latest members to our 120V/240V SPLIT PHASE inverter family and we are pleased to confirm it has
UL1741 compliance (TUV certified) for US markets
. Similar to the LV2424, a single
LV6548
is a 120V output inverter, however split phase output (120V/240V) can be configured by using minimum 2 or more units in parallel.
This unit is unique with the following attributes:
USA Warranty 1 year for ebay customers 2 years warranty for our web customers ( if you cant find us on the web , then you really aren't trying too hard)
Telephonic support (In English) out of Utah
We are the defacto MPP Solar distributors ( usamppsolar & watts247 )
6.5kw 54A 120V pure sine wave output 120V AC
Can offset your utility power by directly supplying loads from your solar panels  ("net zero" effect) when running with or without batteries
120A Mppt at max 250Voc - 2 x (80A - 4kW MPPT Charge Controllers)
120A Utility Charger (120A at 48V = 5.7kW or 48A at 120V)
Built in Genset dry contact start/stop relay
Lithium / LiFePO4 , AGm, Flooded, Silica Salt battery compatible, and more  (custom parameters can be set according to any battery between 40 and 62V
Can be timed to only charge the battery via Utility power during certain hours  (load shifting to charge on off peak rates, and using the battery during peak tariffs) Very popular for our California Customers
High PV Input 250V (Voc)  Open circuit)
Batteryless operation (singe unit mode only) (When using two or more, battery IS REQUIRED, due to the erratic nature of solar energy)
parallelable up to 6 units
built in Wifi Transmitter
Built in parallel kits
Dual PV inputs
BMS Support (Pylontech, Weco, Soltaro) - Separate BMS cable required
Timer for output and Timer for charging
Built In LED RGB panel display to show operational mode
Supports Equalization Charge up to 62V