-40%
Morningstar GFPD-150V Ground Fault Protection Device 150 volt
$ 102.43
- Description
- Size Guide
Description
Morningstar GFPD-150V Ground Fault Protection Device 150 voltMorningstar Corporation
Ground Fault Protection Device - 150V
GFPD-150V
Morningstar’s Ground Fault Protection Device (GFPD) Family, Models GFPD-150V and GFPD-600V, increases safety and design flexibility in off-grid and on-grid photovoltaic (PV) systems. Ground fault protection is used in electrical systems to prevent current from following any unintended paths during a ground fault. It is critical to detect any stray current and to interrupt (break) the circuit until safe operation can be restored. A current imbalance between the primary +/- PV conductors entering the charger/inverter may indicate a ground fault condition. Morningstar’s GFPD will detect this condition and break the circuit on both the positive and negative legs. Disconnecting both poles ensures interruption of the ground fault current.
The GFPD enables system design flexibility. Morningstar designed the GFPD to be easily paired with the TriStar MPPT™ charge controller during on-site installation. Additionally, the GFPD will work just as well in systems with mixed vendor components. Morningstar’s GFPD is a superior solution to ground fault protection. With its custom molded equipment ground terminals, installation and troubleshooting are simplified. Furthermore, the GFPD breaks the entire PV array circuit during a fault condition and requires no special labeling on the battery enclosure.
FEATURES:
Powered via the PV system’s battery bank - and supports a wide range of voltages (12V, 24V, 36V, 48 Vdc nominal systems)
Breaks the connection to the PV array during a fault condition
Leaves the battery and DC loads grounded under all conditions
Eliminates the danger of an ungrounded battery and therefore requires no special labeling at the battery location (per NEC)
Features audible and visual indications/alarms
Performs precise current measurement with no fuses
Built to support both single controller and multiple controllers systems
Certifications: CE, RoHS and REACH Compliant; UL Listed; (NEC) 690.5 Compliant for use as a GFPD device
ELECTRICAL CHARACTERISTICS:
GFPD-150V
GFPD-600V
Input Voltage
10-72 Vdc
Self Consumption
<0.5W
Ground Fault Threshold Current
300 mA +/- 10%
Number of Poles
2
Maximum Solar Voltage
150V
600V
Maximum Solar Current 240V
60A
50A
Trip Method
Relay
Output Trip Signal
12V
Nominal System Voltage
12/24/36/48 Vdc
Mounting Post Size
DIN- and Panel-Mount Options
Terminal
up to 13 mm 2 / 6 AWG
Dimensions
10.6 x 5.1 x 4.4 in
14.1 x 8.7 x 4.2 in
Weight
4.4 lbs
8.9 lbs
Ambient Operating Temperature
-40 °C to +60 °C / -40 °F to +140 °F
Storage Temperature Range
-55 °C to +85 °C / -67 °F to +185 °F
Humidity Tolerance
Up to 100%
Tropicalization
PCB Conformal Coating
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
Morningstar Corporation Ground Fault Protection Device - 150V GFPD-150V Morningstar’s Ground Fault Protection Device (GFPD) Family, Models GFPD-150V and GFPD-600V, increases safety and design flexibility in off-grid and on-grid photovoltaic (PV) systems. Ground fault protection is used in electrical systems to prevent current from following any unintended paths during a ground fault. It is critical to detect any stray current and to interrupt (break) the circuit until safe operation can be restored. A current imbalance between the primary +/- PV conductors entering the charger/inverter may indicate a ground fault condition. Morningstar’s GFPD will detect this condition and break the circuit on both the positive and negative legs. Disconnecting both poles ensures interruption of the ground fault current. The GFPD enables system design flexibility. Morningstar designed the GFPD to be easily paired with the TriStar MPPT™ charge controller during on-site installation. Additionally, the GFPD will work just as well in systems with mixed vendor components. Morningstar’s GFPD is a superior solution to ground fault protection. With its custom molded equipment ground terminals, installation and troubleshooting are simplified. Furthermore, the GFPD breaks the entire PV array circuit during a fault condition and requires no special labeling on the battery enclosure. FEATURES:
Morningstar GFPD-150V Ground Fault Protection Device 150 volt
Morningstar Corporation
Ground Fault Protection Device - 150V
GFPD-150V
Morningstar’s Ground Fault Protection Device (GFPD) Family, Models GFPD-150V and GFPD-600V, increases safety and design flexibility in off-grid and on-grid photovoltaic (PV) systems. Ground fault protection is used in electrical systems to prevent current from following any unintended paths during a ground fault. It is critical to detect any stray current and to interrupt (break) the circuit until safe operation can be restored. A current imbalance between the primary +/- PV conductors entering the charger/inverter may indicate a ground fault condition. Morningstar’s GFPD will detect this condition and break the circuit on both the positive and negative legs. Disconnecting both poles ensures interruption of the ground fault current.
The GFPD enables system design flexibility. Morningstar designed the GFPD to be easily paired with the TriStar MPPT™ charge controller during on-site installation. Additionally, the GFPD will work just as well in systems with mixed vendor components. Morningstar’s GFPD is a superior solution to ground fault protection. With its custom molded equipment ground terminals, installation and troubleshooting are simplified. Furthermore, the GFPD breaks the entire PV array circuit during a fault condition and requires no special labeling on the battery enclosure.
FEATURES:
Powered via the PV system’s battery bank - and supports a wide range of voltages (12V, 24V, 36V, 48 Vdc nominal systems)
Breaks the connection to the PV array during a fault condition
Leaves the battery and DC loads grounded under all conditions
Eliminates the danger of an ungrounded battery and therefore requires no special labeling at the battery location (per NEC)
Features audible and visual indications/alarms
Performs precise current measurement with no fuses
Built to support both single controller and multiple controllers systems
Certifications: CE, RoHS and REACH Compliant; UL Listed; (NEC) 690.5 Compliant for use as a GFPD device
ELECTRICAL CHARACTERISTICS:
GFPD-150V
GFPD-600V
Input Voltage
10-72 Vdc
Self Consumption
<0.5W
Ground Fault Threshold Current
300 mA +/- 10%
Number of Poles
2
Maximum Solar Voltage
150V
600V
Maximum Solar Current 240V
60A
50A
Trip Method
Relay
Output Trip Signal
12V
Nominal System Voltage
12/24/36/48 Vdc
Mounting Post Size
DIN- and Panel-Mount Options
Terminal
up to 13 mm 2 / 6 AWG
Dimensions
10.6 x 5.1 x 4.4 in
14.1 x 8.7 x 4.2 in
Weight
4.4 lbs
8.9 lbs
Ambient Operating Temperature
-40 °C to +60 °C / -40 °F to +140 °F
Storage Temperature Range
-55 °C to +85 °C / -67 °F to +185 °F
Humidity Tolerance
Up to 100%
Tropicalization
PCB Conformal Coating
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
See our other items
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Thank you for visiting our Ebay store!
Morningstar Corporation
Ground Fault Protection Device - 150V
GFPD-150V
Morningstar’s Ground Fault Protection Device (GFPD) Family, Models GFPD-150V and GFPD-600V, increases safety and design flexibility in off-grid and on-grid photovoltaic (PV) systems. Ground fault protection is used in electrical systems to prevent current from following any unintended paths during a ground fault. It is critical to detect any stray current and to interrupt (break) the circuit until safe operation can be restored. A current imbalance between the primary +/- PV conductors entering the charger/inverter may indicate a ground fault condition. Morningstar’s GFPD will detect this condition and break the circuit on both the positive and negative legs. Disconnecting both poles ensures interruption of the ground fault current.
The GFPD enables system design flexibility. Morningstar designed the GFPD to be easily paired with the TriStar MPPT™ charge controller during on-site installation. Additionally, the GFPD will work just as well in systems with mixed vendor components. Morningstar’s GFPD is a superior solution to ground fault protection. With its custom molded equipment ground terminals, installation and troubleshooting are simplified. Furthermore, the GFPD breaks the entire PV array circuit during a fault condition and requires no special labeling on the battery enclosure.
FEATURES:
Powered via the PV system’s battery bank - and supports a wide range of voltages (12V, 24V, 36V, 48 Vdc nominal systems)
Breaks the connection to the PV array during a fault condition
Leaves the battery and DC loads grounded under all conditions
Eliminates the danger of an ungrounded battery and therefore requires no special labeling at the battery location (per NEC)
Features audible and visual indications/alarms
Performs precise current measurement with no fuses
Built to support both single controller and multiple controllers systems
Certifications: CE, RoHS and REACH Compliant; UL Listed; (NEC) 690.5 Compliant for use as a GFPD device
ELECTRICAL CHARACTERISTICS:
GFPD-150V
GFPD-600V
Input Voltage
10-72 Vdc
Self Consumption
<0.5W
Ground Fault Threshold Current
300 mA +/- 10%
Number of Poles
2
Maximum Solar Voltage
150V
600V
Maximum Solar Current 240V
60A
50A
Trip Method
Relay
Output Trip Signal
12V
Nominal System Voltage
12/24/36/48 Vdc
Mounting Post Size
DIN- and Panel-Mount Options
Terminal
up to 13 mm 2 / 6 AWG
Dimensions
10.6 x 5.1 x 4.4 in
14.1 x 8.7 x 4.2 in
Weight
4.4 lbs
8.9 lbs
Ambient Operating Temperature
-40 °C to +60 °C / -40 °F to +140 °F
Storage Temperature Range
-55 °C to +85 °C / -67 °F to +185 °F
Humidity Tolerance
Up to 100%
Tropicalization
PCB Conformal Coating
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
