KuWFi USB3.0 HDMI 4K60Hz Video Capture HDMI to USB Video Capture Card Dongle

Description

Features
1.It can capture one single channel HD HDMI video signals
2.The capture resolution up to 1080P/60Hz, input resolution up to 4K/60Hz, the HDMI Loop-out resolution is the same as input resolution
3.Support Mic recording input
4.Support MJPE and YUY2
5.Support UAC&UVC，support 48 KHz PCM audio
6.It need to install a driver with some of the Windows7 system
7.It is compatible with Windows 7,Windows8,Windows8.1,Windows10 or later, Linux OS, Mac OS operating systems.
8.USB3.0, 300~350MB / s throughput max and it is compatible with USB 2.0 (40MB/s throughput max).
9.It can automatically detect the input video formats and it will adjust to the set output size and frame rate automatically.
10.It can automatically detect the input audio formats and swift it to 48KHz PCM audio.
11.Two capture can be used on one PC
12.The firmware can be updated.
13.With good picture quality, the RGB color range is 0-255, less delay.
14.Support for all third-party player software compatible with UVC and UAC protocols.
Computer system requirements:
Windows® 10 / Windows 8.1 / Windows 7 (SP1)
PC: Intel® Core™ i5-4440 3.10 GHz + NVIDIA® GeForce® GTX 660or above
Notebook: Intel Core i7-4810MQ + NVIDIA GeForce GTX 870M or above
4 GB RAM (suggest 8 GB)
Mobile phone requirements:
Android phone (Most phones are supported)
Only USB2,no USB3.(android UVC driver not support USB3)
If it’s an Android phone with USB, then need pure USB2cable force into his mode to use.
Warm Tips:
1. Please do not use HUB or USB extension cable.
2. A low computer configuration will cause the recording screen to blinking randomly or black.
3. This is a normal phenomenon that the recording screen and the original screen is not synchronized.