EPEVER MPPT charge controller 80 Amp 12V/24V/36V/48V automatic, 200V 6000W input

Description

Overview
Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design,has the features of high response speed, high reliability, and high industrial standard. MSRT can guarantee very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the maximum power point (MPP) of PV array to obtain the maximum energy of the panel. The limitation function of the charging power and current and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.
With the adaptive three-stage charging mode based on digital control circuit, Tracer AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system. All-around electronic protections, including overcharging, over discharging, and PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for a longer service time. The isolated RS485 interface with standard MODBUS communication protocol and 5V power supply makes it easy for customer to expand the application, Support up to 8 charging in parallel to expand system and meet with different monitoring requirements, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring, etc.
Product Features
•
CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3)
•
High quality & low failure rate components of ST and Infineon to ensure the product’s life
•
Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed
•
Maximum DC/DC transfer efficiency is as high as 98.7%
•
Advanced MPPT control algorithm will minimize the MPP loss rate and loss time
•
The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP
•
The wider range of MPP operating voltage.
•
Auto control system to limit the charging power & current go over the rated value.
•
Support 4 charging options: Sealed, Gel, Flooded and User.
•
Battery temperature compensation function
•
Real-time energy recording and statistical function
•
Automatic over-temperature power reduction function
•
Hundred percent full load operation in working environment temperature range within charging & discharging
•
Support up to 8 units in parallel to expand system
•
Load relay control external load switch signal to realize diversified load work modes
•
The first and the second disconnection of load control, contain two relay’s contact.
•
Auto-control of utility and generator relay design
•
Utility or generator auto-control relays make it easy to compose the hybrid power system
•
The remote temperature and the voltage sensor design will collect accurate data of battery temperature and voltage
•
Isolated RS-485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol
•
To monitor or set the parameters by using the phone Apps or PC software.
Protection
✔
PV Over Current/power
✔
PV Short Circuit
✔
PV Reverse Polarity
✔
Night Reverse Charging
✔
Battery Over Voltage
✔
Battery Over Discharge
✔
Battery Overheating
✔
Controller Overheating
✔
TVS High Voltage Transients
Characteristics
Wiring Diagram
One Controller
Multiple controllers
Technical specifications
Item
5415AN
6415AN
8415AN
8420AN
10415AN
10420AN
Nominal System Voltage
12/24/36/48VDC or Auto
Battery Input Voltage Range
8V～68V
Battery Type
Sealed/Gel/Flooded/User
Battery fuse
80A/58V
150A/58V
Rated charge current
50A
60A
80A
80A
100A
100A
Rated charge Power
625W/12V
1250W/24V
1875W/36V
2500W/48V
750W/12V
1500W/24V
2250W/36V
3000W/48V
1000W/12V
2000W/24V
3000W/36V
4000W/48V
1250W/12V
2500W/24V
3750W/36V
5000W/48V
Max. PV open circuit voltage
150V
①
138V
②
150V
①
138V
②
150V
①
138V
②
200V
①
180V
②
150V
①
138V
②
200V
①
180V
②
MPP Voltage Range
(Battery Voltage +2V)
～108V
③
(Battery Voltage +2V)
～108V
③
(Battery Voltage +2V)
～108V
③
(Battery Voltage+2V)
～144V
③
(Battery Voltage +2V)
～108V
③
(Battery Voltage+2V)
～144V
③
Tracking efficiency
≥99.5%
Conversion efficiency
98.5%~98.7%
Temperature compensate coefficient
－3mV/℃/2V(Default)
Self-consumption
98mA/12V
60mA/24V
50mA/36V
46mA/48V
Grounding
Common negative
Relay
Rated Value:5A/30VDC
Max. Value:0.5A/60VDC
RS485 interface
RS485(RJ45)
LCD backlight time
60S(Default)
①
At minimum operating environment temperature
②
At 25℃ environment temperature
③
The maximum PV open circuit voltage must never exceed 138V or 180V at 25℃ environment temperature
Mechanical Parameters
Item
5415AN
6415AN
8415AN
8420AN
10415AN
10420AN
Dimension
261×216×119mm
340×236×119mm
394×240×134mm
394×242×143mm
Mounting dimension
180×204mm
260×224mm
300×228mm
300×230mm
Mounting hole size
Φ7
Terminal
6AWG/16mm 2
2AWG/35mm 2
Recommended cable
6AWG/16mm 2
4AWG/25mm 2
2AWG/35mm 2
Net Weight
3.6kg
4.7kg
6.4kg
7.7kg
Environmental Parameters
Ambient temperature range
-25℃～+45℃
LCD temperature range
-20℃～+70℃
Storage temperature range
-30℃～+85℃
Humidity
≤95%, N.C.
Enclosure
IP20
Certification
Safety
EN/IEC62109-1
EMC
EN61000-6-3/EN61000-6-1
FCC
47 CFR Part 15, Subpart B
ROHS
IEC62321-3-1
Troubleshooting
Accessories (Included)
Accessories (optional)