Charge Controller Solar Panels 12V Charger 8A Battery Maintainer Regulator Power

Description

More product information
APPLY TO 12V SOLAR PANELS:The 8A solar controller is used only for 12V solar panels and 12V batteries. The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller.
THE MAXIMUM INPUT OF SOLAR ENERGY IS 130W:The maximum power of solar panels is130W, the maximum voltage 22V, and the maximum current 8A. It is suitable for 12V rechargeable batteries. In order to lengthen its service life, please do not overload.
EASY TO MONITOR THE LED INDICATOR LIGHTS: The solar controller integrates two LED lights, both green and red indicator lights on (fully charged) and only the red one (charging). The product also provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.
QUICK AND EASY CONNECTION:This solar charge controller uses SAE plugs for easy use and access to solar panels, batteries and loading equipment. Users don't have to worry about positive (+) and negative (-)
All-round protection :The product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection. The controller needs to be connected to a battery to work.
Advantage 1:  It will turn off automatically at night, and won’t consume battery power. Advantage 2: If there is connection errors，it will not be damaged.
The controller needs to be connected to a battery to work.
8-Amp Solar Charge Controller will prevent overcharging of
batteries by regulating the voltage from a 12-volt solar panel to a safe level for charging 12-volt batteries.
A solar charge controller is required for solar array of 20-Watt or higher only.
Designed for use with 12-volt solar panels, this solar charge controller is safe for
use with up to 8-amp or 130-Watt from a solar array.
Two LED display shows that the solar panel is functioning and whether your battery is charging or fully charged.
The solar controller will also prevent a battery from losing power through the solar panel at night.
Solar charge controllers should be installed close to the battery in a dry and ventilated area.
Protection: Over-load protection; Short circuit protection; Lightning protection;
Under-voltage protection; Over-charging protection; Reverse Polarity protection
Specification:
Rated voltage:12V
Rated charging current:8A
Rated load current:8A
Cut-in Voltage:13Volts
Cut-out Voltage:14.2Volts
Adjustable controlling parameter of the system
Suitable for Home, Industrial, Commercial etc
Note:
Never deeply discharge your battery
Never let your battery voltage pass below 11.0 volts
Use a DMM(DIGITAL MULTI-METER) to measure your battery’s voltage
Connect charge controller to the solar panel first.
The charge controller is not waterproof, should be placed in a well ventilated dry area, free from flammable gases and moist
Package List:
1 x Solar Charge Controller(not include solar panels&alligator clip cables)
1 x User Manual
Free Shipping
Return window is 30 day after receiving the item