84" Adjustable 3 Sections Massage Table Folding Massage Bed Spa Bed

Description

·
o
3-Sections design: The massage bed is designed in 3 sections for more usage requirements. The length of each section separately is 93cm/36 inches, 31cm/12 inches, 61cm/24 inches. You can lean on the backrest as you need.
o
Wooden frame & waterproof cushion: The spa bed is supported by beech wood legs and composite board frames strongly. The bed mattress is made of spongy cushion covered by PVC leather, waterproof and oilproof. It is also easy to clean. You can use a wet cloth to wipe the dust and dirt.
o
Foldable & portable: Due to the foldable design, the massage table is easy to carry around, especially for mobile therapists. The whole massage bed will become a portable case with clasps after folded. If you want it for home use, it also saves space when not in use.
o
Easy assembly: It is easy to set up and close the spa bed. Open the case and let legs out and adjust them to the height you need, and place a headrest, a hand pallet and two armrests in position.
o
Adjustable height & backrest: There are two twisting adjustment knobs on each leg for 8 different heights. The height of the massage table can be adjusted from 64cm/25.2inch to 85.5cm/33.7inch. Also, the end section of the bed is liftable for ten different heights and the max height is 45cm/18 inches.
o
Removable armrest & adjustable headrest: The headrest, the armrest, the hand pallet are all removable if you do not need them. Also, The headrest is adjustable for different heights or angles. The headrest adopts quick-fix locking device, through which the angle of the headrest can be adjusted.
o
Materials: Beech Wood Leg + Composite Board + Cushion (Plywood + Non-woven Fabrics + Foam + PVC ); Color: Black
o
Unfold Size: 213 x 82 x 64-85.5cm/84 x 32.3 x 25.2-33.7inch (L x W x H); Folding Size: 92.5 x 60 x 18.5cm/36.4 x 23.6 x 7.3inch (L x W x H); Headrest Size: 28 x 26.5 x 7.2cm/11 x 10.4 x 3inch (L x W x H); Armrest Size: 35 x 11 x 5cm/14 x 4.3 x 2inch (L x W x H); The Thickness of Foam: 5cm/2inch
o
G.W.: 17.3kg/38lb; Max. Load Bearing: static, 250kg/551.2lb; dynamic, 102kg/220lb
Installation of the Headrest
1. Unlock the angle lock.
2. Insert and adjust the headrest frame to the proper position.
3. Press the screw on the other end of the headrest to prevent it from rotating (We recommend fixing it with a 6-angle wrench).
4. Rotate the angle lock clockwise to tighten.
5. Rotate the angle lock counterclockwise to loosen.
6. Press down the angle to finish.
Note: Please don't adjust it unduly or violently.
o