-40%
60A MPPT Solar Panel Battery Charge Controller 12/24V/36V/48V LCD Regulator Auto
$ 61.24
- Description
- Size Guide
Description
HomePayment
Shipping
Return Policy
About Us
Contact Us
Feedback
60A MPPT Solar Panel Battery Charge Controller 12/24V/36V/48V LCD Regulator Auto
PowMr Solar Charger Controller MPPT 60A 12V 24V 36V 48V Blacklight LCD Regulator Max PV Input 150VDC Support Lithium batteries
Advantages:
【
60A MPPT CHARGING CONTROLLER
】 4-stage battery charging algorithm for a rapid, efficient, safe charging(Bulk Charge, Boost Charge, Float Charge, and Equalization), 60amp Rate Charging current.
【
Controller WIDE RANGE SOLAR VOLTAGE/POWER SUPPORT
】Controller supports High PV Input Power/voltage. The controller can accept Solar voltage up to 190V. When battery is 12V system: Suggest Solar power 720W, suggest range:DC20V~DC80V;1440W 105V when 24V; 2100W 150 when 36V; 2800W 150v when 48V.
【
12V/24V/36V/48V BATTERY SUPPORT
】Negative grounding design controller safer, controller Compatible with a variety of batteries(lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, other battery can be customize charging parameter according to your need.
【
0 layer MPPT charge controller
】Easy to know the Charging process in one glance.
【
FULL CHARGING PROTECTIONS
】Short Circuit/Overcurrent/Reverse Polarity, etc. protections; a Very detailed LCD screen and 4 buttons make this solar controller very simple to use. And detailed troubleshooting list, Fast service support, and Simple and detailed wiring instruction are available.
Feature:
This controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charges the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery from over-discharging.
The 0 layer's charging process has been optimized for long battery life and improved system performance.
Electronic protection: Overcharging, over-discharging, overload, and short circuit
Reverse protection: Any combination of solar module and battery, without causing damage to any component
Controller charging happens when solar panels' voltage is higher than batteries.
Lithium Battery Activation: this has a reactivation feature to awaken a sleeping lithium battery. The 0 layers will apply a small charge current to activate the protection circuit and if a correct cell voltage can be reached, it starts a normal charge.
Specification:
Technical Specification for Selection Guide
Models
POW-M60-PRO
Charging mode
MPPT Maximum power point tracking automatically
Charging
3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge
System type
DC12V/24V/36V/48V Recognition automatically
System voltage automatic recognition
1 2V system (DC9V-DC15V)
24V system (DC18V-DC29V)
36V system (DC30V-DC39V)
48V system (DC40VDC60V)
Soft start time
<1S
Dynamic response and recovery time
>98.1 % (Voc is 1.5 or 2 times than battery, then it's the best efficiency)
PV utilization
>99%
Input specification
VOC from PV( Make sure the Voc of PV meets the requirement right. Voc is 1.5 or 2 times than battery, then it's the best efficiency.)
12V system (DC20VDC80V)
24V system (DC37V-DC105V)
36V system (DC50VDC160V)
48V system (DC72VDC160V)
The maximum PV input voltage (Voc)
DC190V(The controller can't work at this voltage of a long duration that will break the controller. Please refer to the Input voltage from PV.)
The maximum PV input power (The total power rated of PV can't be over this watt that will break the controller.)
12V system (720W)
24V system (1440W)
36V system (2100W)
48V system (2800W)
Output specification
Selectable battery type(default is Sealed)
Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user)
Absorption Charging Voltage
Refer to Batteries charging reference
Floating Charging Voltage
Refer to Batteries charging reference
Overcharging protection voltage
12V system (15V)
24V system (30V)
36V system (45V)
48V system (60V)
Rated output current
60A
Temperature Coefficient
±0.02%/ °C
Automatic temperature compensation
14.2V-(Max temperature-25 °C)*0.3
Output voltage ripple-peak
100mv
Output voltage accuracy
<±1%
Input Anti-intrusion protection
yes
Temperature Protection
75°C
Temperature increased protection
Output power will reduce when it's more than 70 °C
Output power will be normal when it's less than 55 °C
Fan-on temperature
>40 °C
Fan-off temperature
<35 °C
Acoustic noise
<40dB
Cooling way
Forced air cooling
Components
Imported materials, Accord to EU standards, Industrial grade range.
Environmental requirements
Meet 2002/95/EC; No cadmium, hydrides, and fluorides
Security Level
Accord to CE, PSE, FCC, EMC, EN60950
Electromagnetic Compatibility
Accord to EN6W00, EN55022, EN55024
Enclosure
IP21
Net weight(Kg)
1.3
Gross weight(Kg)
1.5
60A Controller Detail
COPPER COILS
Genuine MPPT controller, The Three copper coils play a step-down role to make your system work more stable.
Detail inside of the controller
High-quality components, perfecting system performance, with a maximum conversion efficiency of 98%
Very detail display
Easy to operate/know your charging
Weight: 2.9 Ibs/1.33kg
Wiring PORTS
Mounting Holes: 4 x Ø10mm
high-quality wiring terminal
Detail of 60A solar charge controller
Front: LCD and Button
back: Metal heat sink
Wiring terminal
Controller side face
60A Controller Charging parameter
System voltage: 12V / 24V / 36V / 48V DC Auto
Rated charge current: 60A
Suggestion wiring:
when battery 12V, suggest input solar voltage range DC20V~DC80V; Solar power 720W;
when battery 24V, suggest input solar voltage range DC37V~DC105; Solar power 1440W;
when battery 36V, suggest input solar voltage range DC50V~DC160V; Solar power 2100W;
when battery 48V, suggest input solar voltage range DC72V~DC160V;Solar power 2800W;
Battery support:
12V 24V 36V 48V Deep cycle Sealed, Gel, Flooded, and Lithium, User battery. (Support Customizable charging voltages)
Battery System Voltage read: DC9V~DC15V (the controller will read as 12V system) / DC18V~DC30V (24V) / DC32V~DC40V (36 V) / DC42V~DC60V (48V) (First connection please make sure your battery has enough voltage) After controller read your battery, please select correct battery type.
Package Includes
1 x 60A MPPT Solar Charge Controller
1 x English User Manual
Mounting
information
The battery must be connected first. NEVER connect the solar panel array to the controller without a battery.
Ensure input voltage does not exceed 190 VDC to prevent permanent damage.
Do NOT let the positive (+) and negative (-) terminals of the battery touch each other.
Do NOT connect any inverters or battery chargers to the load terminal of the charge controller.
Place the controller on a vertical surface protected from direct sunlight, high temperatures, and water. Make sure there is good ventilation.
Please check for Clearance, and verify that there is sufficient room to run wires and clearance above and below the controller for ventilation. The clearance should be at least 3 inches (75mm).
Payment
Delivery Details
Terms of sales
About US
Contact us
Payment
1. We can accept PayPal only.
2. Please pay for your order within 48 hours before order close.
Delivery Details
Our warehouses are located in
California
, we will ship goods out for you
within 24 hours
. We offers a variety of shipping methods such as USPS, UPS, FEDEX.
1.
Shipment Time:
Your order will be sent out WITHIN THE HANDLING TIME.HANDLING TIME are based on 1 business days (Monday to Friday) excluding Holidays and weekends. After sending out the item, we will send you a notification letter, with the shipment information of the tracking number.
2.
Shipment Type
: The order of multi items may be sent via MULTI PACKAGES.If your order is including MULTI ITEMS, we may send the item to you via MULTI PACKAGES. If something is missing in the first package you received, please don't open a case or return, please ask us first, we will check if your order is sent via multi packages.
3.
Delivery Time
: DIFFERENT LOCATION, DIFFERENT SHIPPING TIME.In normal condition, the shipping time is about 2-5 working days. Some of that may be 5-10 working days.If you want to check the delivery time of your order, please kindly ask us first.
Last but not Least, PLEASE DON'T OPEN THE CASE AND RETURN REQUEST/LEAVE NEGATIVE FEEDBACK FOR US BEFORE Before sending us a letter!!!Any issues, please kindly contact the customer service of our store FIRST.
Terms of sales
1. We provide 30 days money back on non-defective, undamaged, unused and resalable products. Product is not eligible for refund after the 30-day refund period has expired.
2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3. For all returned products, Please contact us for the returning address and Pls do not open return case.
4. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. In return, we will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.
About US
Powmr is an energetic and technological innovative company, dedicated in researching, manufacturing and marketing solar related proudcts, the factory islocated in Shenzhen China. We provide products including Solar Controllers, Micro Grid Tie Inverters, Solar Lamps, MC4 Connectors and other Solar Related Products. The company presses the ISO9000 quality management system control product quantity strictly, the export production all passes the relevant national company check (CE), get high evaluation of the customer.
Since 2009, our service has been expanded to all over world.
Our products are widely used in Spain,United Kingdom,France,India,Italy,Australia and many other countries and regions ,and have been extensively applied and highly appraised in a number of major projects."Quality first, customer orientation" is our purpose. Powmr will be committed to provide the best service to you!
Contact us
1. Please contact us via eBay massage if you have any questions. We will reply you within 24 hours.
2. Feedback is important to us, we will leave positive to our customers.
3. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.
4. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute.