6/9/12V MPPT Solar Panel Charger Lithium Battery Charging Regulator Board

Description

Home
Payment
Shipping
Return Policy
About Us
Contact Us
Feedback
Store Categories
Other
Capacitance/resistance
Processor and microcontroller
Diode/transistor
Switch/circuit protection/powe
Interface chip/clock timing
Optoelectronic devices
Crystal/oscillator/resonator
Filter/Amplifier/RF
Connector
Memory/sensor
Inductor/coil/transformer
Display module/LED driver
Data conversion chip/logic dev
Tools/Accessories/Wire
Audio device/micro motor
IOT/Functional Module
Development Board
Business&Industrial
motor
Description:
This is a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries.
This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargable LiPo battery. Set-up is easy as well, just plug your solar panel into one side of the solar charger and your battery into the other and you are good to start charging!
Solar maximum power point tracking (MPPT) is to ensure that the light intensity change, photovoltaic cells output maximum power, to make full use of solar energy. In general, need to use a switch mode DC - DC converter to realize MPPT function, keep the output voltage and charging current product maximize (output).
The output of the Solar Charger is intended to charge a single polymer lithium ion cell. The load should be connected in parallel with the battery. Each Solar Charger comes equipped with a CN3791 power tracking battery charging circuit and pre-installed four 2-pin JST/PH2.0 connectors.
Default we have set the holding voltage for MPPT. So we have 3 version for the input voltage 6V/9V/12V(for Solar Panel working voltage 6V/9V/12V), very suitable for the application of the input voltage and battery voltage difference is bigger.
Note: If the CN3791 MPPT Solar Charger is 9V version, you must use the Solar panel working Voltage is 9V.
Feature:
Input voltage: select the corresponding module according to the nominal voltage of the solar panel
(6V/9V/12V)
Output voltage: nominal 3.7V full charge voltage 4.2V lithium battery
Interface: 2-pin JST connectors (or PH2.0)
Solar panel maximum power point tracking
Complete charge management for single-cell lithium batteries
Charging current up to 2A
PWM switching frequency: 300KHz
Charging voltage: 4.2V ± 1%
Trickle charging of deeply discharged batteries
Automatic recharge
Charge status and charge end status indication
Soft start
Battery overvoltage protection
Working environment temperature: -40 °C to +85 °C
Size: 45X20X9.5mm
Package includes:
1 x CN3791 6V/9V/12V MPPT Solar Panel Regulator Controller
Payment Method
Shipping Policy
Returns & Refund Policy
Feedback
About us
Payment Method
EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping Policy
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
Returns & Refund Policy
All package need to
wait 30 days
(US only need 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
About us
We are professional Business & Industrial DIY Module part store. Follow and save our store,We will provide the best service and high quality-low price items for you.Save more
On Dec 3, 2022 at 22:24:12 PST, seller added the following information: