30-100A Solar Panel Battery Charge Controller 12V/24V LCD Regulator Auto Dual

Description

Description:
Fast Ship From CA, USA within 1 Business Day!!!
High quality and 100%
Brand
new
.
Application
:
Home, Industrial, Commercia
l.
This solar charging voltage regulator provides overcurrent protection, short circuit protection, reverse polarity protection, low voltage and overcharge protection, and is a reliable protector for your device.
1. Built-in industrial microcontroller.
2. One-key configuration, digital display, automatic memory function.
3. Full pwm-load management load.
4. Built-in short circuit protection, open circuit protection, reverse protection, overload protection
5. Double mosfet reverse current protection, low heat generation.
1.Features：
-The charge controller should be connected to the battery first, then the solar panel, and finally the load! You can change settings with a simple one-touch operation.
-Intuitive LCD display, can clearly indicate status and data, able to switch modes and parameter configuration, suitable for home, industry, business, etc.
-The built-in industrial microcontroller automatically manages, memorizes various parameters set by the user, and the data will not be lost when the battery is exhausted. Once the voltage is too low, the solar controller will automatically shut down.
-Solar Charger Controller with 30A/60A Rated Discharge Current is automatically compatible with 12V or 24V systems for lead acid batteries: OPEN, AGM, GEL. Dual USB 5V/3A output ports support phones, tablets or other devices that require 5V.
2.Specification:
-
Material:
ABS
-
Rated voltage 12V
-Operating temperature: -35 to 60 degrees Celsius
-
Discharge stop
:
10.7V
-
Discharge and reconnect
:
12.6V
-
USB output
:
5V/2.5A
3.Package：
-1 x Solar Charge Controller
-1 x User Manual
System connection:
1. Connect the battery to the positive and negative poles of the charge controller. Displays 1 when a 12V battery is detected, and 2 when a 24V battery is detected.
2. Connect the PV modules to the positive and negative voltage regulators.
3. The charging controller is connected to the consumer positively and negatively, and the order is reversed when unloading!
Incorrect sequence may damage the controller!