2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC - 110V/ 220VAC

Description

Max Efficiency:>92%               MPPT Efficiency:99%  1.  Low cost and easy installation   2.  Directly connect to three phase wind turbine  3.  Much better output waveform compare with similiar GTI  4.  Improving the efficiency of the entire solar power system      Overload protection ,Anti-island protection      Short-circuit protection/Reverse polarity protection   5.  AC output voltage and current THD<5%,PF>99%
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC - 110V/ 220VAC
--Max Efficiency:>92%               MPPT Efficiency:99%
--DC/3PHASE AC  22-65V/ 45V-90V
--AC   100V 110V 120V 220V 230V 240V  50hz 60hz
NEW 1000W Wind Power Grid Tie Inverter
Max Efficiency:>92%               MPPT Efficiency:99%
1.  Low cost and easy installation
2.  Directly connect to three phase wind turbine
3.  Much better output waveform compare with similiar GTI
4.  Improving the efficiency of the entire solar power system
Overload protection ,Anti-island protection
Short-circuit protection/Reverse polarity protection
5.  AC output voltage and current THD<5%,PF>99%
This model grid tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can’t keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.
Technical Data
Model
TEG-2000G2-WAL
TEG-1000G2-WAL
Max. Power Output
2000W
1000W
Input AC/DC Voltage Range
22-65V/45V ~ 90V
AC Output Voltage Range
90-130V / 190VAC ~ 260VAC
Output Frequency
46Hz~65Hz
Standby Power Consumption
<0.5W
Total Harmonic Distortion
<5%
Peak Inverter Efficiency
92%
Power Factor
0.99
Output Wave Form
Pure Sine Wave
MPPT Efficiency
99%
Over Current Protection
Yes
Over Temperature Protection
Yes
Reverse Polarity Protection
Yes
Anti-Island Protection
Yes
Stackable
Yes
Weight ( Kg)
6.5kg
5.5KG
Dimensions (W x H x D)
434*196*88mm
322*196*88mm
(1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor.
(3) AC socket,This socket will connect the inverter to the public grid via the AC cable.
(4) Cooling fans.
(5) Input Terminals. This terminals will connect to the wind turbine.
Inverter Display Instruction
The Inverter display can show many information,The main interface of the display and the icons explainations are show above.
Set Menu:Choose the set menu icon on the main screen interface,click the confirm button to enter into the interface show below,In this interface,can set the LCD backlight always on or auto turn off backlight after 3 minutes no action.
The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid.Select the internal limiter mode,inverter will work under limiter mode,output power of the inverter will be determined by load power.Select the external limiter mode,inverter need a external limiter module working with it.For more details about the limiter function,pls contact supplier. ( this function only useful with limiter type inverter. )
Power View:
In this interface,the display shows real time power,PV input voltage, inside temperature,date and time.
Clock And Date Setting:
Set the clock and date in this page,save the setting before exit
.
Notes: Save the setting after you reconfigurate the working mode or backlight setting.
Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter.
Grid Waveform:
This interface will show the real time grid waveform.The grid voltage and frequency also will show in this interface.
Energy Menu:
The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page.
AC Output Current Waveform and PF Test Of 2000W Model
Tested 2000W model at nearly full load,Output current waveform shows good pure sine wave in oscilloscope,PF value also shows in good result,99.8% PF value.
Advantages:
1. Advanced patented technology,  MPPT efficiency is higher.
2. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years.
3. Each inverter need to pass twice testing (20 hours) before leaving factory.
4. Warranty: 2 years of free maintenance and replacement, lifetime technical support.
5. Low cost and easy installation .
6. Free combination.
7. Combination of SGPV does not interact.
8. Improving the efficiency of the entire solar power system.
9. Low power consumption.
Payment
Delivery details
Return service
About us
Feedback
Payment
We Only accept Paypal.
Please finished the payment within 7 days or we will close the auction.
Leave phone number when you choose an express way to ship your order.
We just send to your ebay address,don`t ask us to change the address via ebay message.
Delivery details
Countries
Shipping Method
Tracking NO.
Shipping time
United States
Sea shipping
No(Follow-up Tracking information will not be generated until the package arrives at the destination country)
25-35 work days
Express shipping
Yes
7-10  work days
Canada
Sea shipping
No(Follow-up Tracking information will not be generated until the package arrives at the destination country)
35-45 work days
Express shipping
Yes
7-10  work days
Australia
Sea shipping
No(Follow-up Tracking information will not be generated until the package arrives at the destination country)
35-45 work days
Express shipping
Yes
7-10  work days
United Kindom
Sea shipping
No(Follow-up Tracking information will not be generated until the package arrives at the destination country)
35-45 work days
Express shipping
Yes
7-10  work days
Italy,France,Germany,
EU Royalway
No(Follow-up Tracking information will not be generated until the package arrives at the destination country)
25-35 work days
Express shipping
Yes
7-10  work days
EU coutries
EU Royalway
No(Follow-up Tracking information will not be generated until the package arrives at the destination country)
25-35 work days
Yes
7-10  work days
Note:Our products are shipped by sea or European rail by default. We will help you bear customs duties.
If you need it urgently, please let us know, we can help you ship it through expedited service, but there is an additional expedited fee, and when the package arrives in your country, you need to pay the customs duties yourself.
Return service
Return Policy details
1Year Warranty. Buy with confidence!
We accept refund and replacement if the item lost by the shipping company.
We offer 14days Dead on arrival replacement warranty from the date of receipt .
Buyer must pay the return postage for any return reason.In return,we will pay the shipping fee for send it back to you.
Replacement or refund will be issued after the items are recevied by us in good condition.
About us
1. Please contact us via eBay massage if you have any questions. We will reply you within 24 hours.
2. Feedback is important to us, we will leave positive to our customers.
3. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.
4. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute.
Feedback
Our goal is to make sure you are a happy buyer and pleasant shopping with us. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.