12/24V 30/100A MPPT/PWM Solar Charge Controller Panel Battery Regulator Dual USB

Description

30A Controller
Description:
① Using industrial-grade main control chip, the sampling accuracy, temperature, charging current, and discharging current are accurately displayed in real time, and the power generation is clear at a glance.
② Large-screen LCD display: charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control, adjustable charge and discharge parameters, with power-off memory, etc.
③ Auto focus, tracking charging, high charging efficiency, non-stop detection. Anti-backflow circuit, ultra-low heat generation.
④ Dual USB output, the maximum current is up to 2.5A, supporting Apple mobile phone charging.
⑤ Complete 3-stage charging management, effectively protect the battery, the battery is more durable.
⑥ Built-in over-current, short-circuit protection, open-circuit protection, and reverse connection protection, all of which are self-recovery, without damaging the controller.
Specification:
Rated voltage: 12V/24V
Rated current: 20A
USB output: 5V/2.5A
Standby current: <10mA
Operating temperature: -35 to +60 degrees
Ncrease charging voltage: 14.4V (sealed type)
Maximum PV voltage: 50V
Maximum PV input power: 260W (12V) 520W (24V)
Rated charging current: 30A
Rated discharge current: 30A
Float voltage: 13.7V (default, adjustable)
Discharge cut-off voltage: 10.7V (default, adjustable)
Discharge recovery voltage: 12.6V (default, adjustable)
Package Included:
1 x Solar Panel Battery Regulator Charge Controller
1 x User Manual
100A Controller
Description：
-100% brand new and high quality.
-Advanced maximum power point tracking technology, the efficiency is not less than 99.5%. High-quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency.
-Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions.
-Dual USB output, the maximum current is 2.5A. Equipped with all necessary protection devices, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat.
-Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific value, with self-recovery function, will not damage the controller.
-Real-time display of temperature, charging current and discharge current. Current autofocus tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking.
Specifications:
Name: LCD screen solar controller
Voltage: DC 12V / 24V
Display: LCD screen
Self-consumption: <10MA
Overcharge protection: 14.4V / 28.8V
Overcharge Float charge: 13.7V / 27.4V
Charge recovery voltage: 12.6V / 25.2V
Over discharge protection: 10.7V / 21.4V
Over discharge recovery: 12.6V / 25.2V
Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.)
Working temperature: -35 ℃ -60 ℃
12V fits 18V solar panel, 24V fits 36V solar panel
12.0 volt lead acid battery corresponding
The float voltage is set to: 13.6
The recovery discharge voltage is set to: 12.6
The discharge cut-off voltage is set to: 10.7
The float voltage is set to: 14.6
The recovery discharge voltage is set to: 13.6
The discharge cut-off voltage is set to: 11.0
The float voltage is set to: 12.6
The recovery discharge voltage is set to: 11.6
The discharge cut-off voltage is set to: 9.6
The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available).
PV system power Description:
100A battery 12V photovoltaic system: power is respectively 100-650W
100A battery 24V photovoltaic system: power is respectively 200-1300W
Package Included:
1X Solar Panels Battery Charge Controller
1X User Manual
Notes:
The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries.
This controller can only use photovoltaic panels as charging power. Do not use DC or other power as charging power.
The LCD display has an error of 0.2 V- 0.3 V, but this is normal.
Old batteries may be degraded the capacity after hundereds of cycles, easily drop lower than 8V, which results in the controller will be shut off (LCD screen become totally “DEAD”).
Indoor use only: the working temperature of this controller is -35°C to +60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation.
100A Blue
Controller
Product Features
MPPT solar charge controller: Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%.
Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection during charging, bidirectional focusing tracking.
Large-screen LCD display, adjustable charging and discharging parameters.
This MPPT controller has perfect SOC function, control charge current, and supply power to the loads.
Prevent the battery from over-charging, over-discharging and reverse charging to solar panels during nights.
How To Use
Q: Does this controller support lithium batteries?
A: The new controller(MPPT) is available with lead acid and lithium batteries, others not.
Q: My solar panel is 36V 200W, can I charge 12V battery?
A: For 12V battery, solar panel working voltage can be between 17V and 23V; For 24V battery, solar panel working voltage can be between 36V and 46V. Please confirm that the power and Solar panel working voltage the are within this range. If it's too high, it will damage the controller.
Q: Can the inverter be connected to the load side of the controller?
A: Please connect the inverter directly to the battery and not to the load terminal of the controller.
Q: Does the controller have a requirement for battery capacity?
A: No, as long as the voltage corresponds to it (but the maximum current of the board and the battery capacity should correspond). For example, the current of the solar panel is 5 amps, the battery capacity is preferably 50 AH, the current of the solar panel is 10 A, and the battery capacity is preferably 100 AH. Do not use a large board to charge a small battery, which may be dangerous.
Q: How do you connect the solar panels, batteries, and controllers?
A: Please be sure to connect the battery first (to ensure that the battery is fully charged), then connect the solar panel. When disassembling, please remove the solar panel first, then remove the battery, please connect it exactly as this order, otherwise the controller and other components probably damaged.
Others
1. Always keep the battery on fill voltage condition.
2. Prevent the battery from over-charging.
3. Prevent the battery from over-discharging.
4. Prevent the battery from reverse charging to solar panels during nights.
5. Reverse Polarity Protection for Battery
6. Reverse Polarity Protection for Solar Panels
7. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working.
8. Thunder protection
9. According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25℃ condition, locked by the CPU procedure, cannot adjust.)
10. The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.
Package Included
1 x Solar Panels Battery Charge Controller
1 x User Manual
100A Green Controller
Description:
1. Always keep the battery in the charging voltage state
2. Prevent the battery from overcharging
3. Prevent excessive battery discharge
4. Prevent the battery from recharging on the solar panel at night
5. Battery reverse polarity protection
6. Reverse polarity protection of solar panel
7. When the battery voltage is low, the controller will automatically reduce the system load. If the voltage battery returns to normal, the charging starts again
8. Lightning protection
9. According to the battery voltage level, the controller may automatically adjust the charging stop voltage, charging stop voltage and load recovery voltage. (The default setting is below 25 ° C, locked by the CPU process, and cannot be adjusted
10. The controller automatically compensates the temperature. The charging voltage is a function of the ambient temperature change
Features:
1. Industrial grade main chip, 16AD sampling accuracy, temperature, accurate real-time discharge current display, and clear power generation
2. Automatic focusing MPPT tracking loading, high charging efficiency, and bi-directional focusing tracking when charging is detected without stopping
3. Large LCD, adjustable charging and discharging settings. Ultra wide charging and adjustable discharge. As long as you know the characteristics of the battery and the corresponding charging settings, you can charge the battery. When the output is disabled, the time can be adjusted for convenience. (There is no point setting on the market)
4. Full three-phase charging management, which effectively protects the battery and makes the battery more durable
5. Built in overheat, overcurrent and short circuit, open circuit protection and reverse connection protection. When the fault is eliminated, the controller automatically recovers without damaging the equipment
6. Two way MoS tube backflow prevention circuit, high-power charging mode, ultra-low heating
7. A5.0 solar charging DC socket, R5. 0 DC lamp output DC plug, convenient connection
Specification: 100A
Material: PCB
Rated voltage: 12/24V
Rated current: 100A
Size: 13.5 * 7 * 2.8cm
Photovoltaic voltage: 50V
PV input power: 1200W (12V)/1200W (24V)
Package List:
1 x 100A
MPPT Controller
1 x User Manual